ok so its gotten to the point where i get one of the three on the drivers side that barely hits the windshield. the rest go over or are most likely clogged. another barely hits on the passenger side. anybody have the same issues? can you replace that little nozzle or aim them??

 

Yeah they really do. Try cleaning the wholes with a pin of something

 

Simple fix

Get a sewing needle and carefully put the tip into eac nozzle to unclog

With the same needle, you can aim each nozzle. Just keep it in the hole and move the nozzle to point where you want it.

I havent actually tried it, but instructions are in the Car Manual and/or FSM

 

My dealer gave me some steel wires that they use to unclog them since I complained about it so much.

 

I agree, they do suck. Easy fix as others have said though. Mine get off target again in a few months so don't lose the pin or wire.

 

I've complained about them, too. But, there's nothing to do but clean them out.

I do wonder if the sprayers from the G37 would be a direct fit?

 

just tried this, found a needle off one of the dress shirts i got for christmas and poked it in there they work great now.... i just need new wiper blades now too.

 

For Future reference

From Car Manual:


Uploaded with ImageShack.us

From Factory service Manual:


Uploaded with ImageShack.us

 

Strange because I've had the same problem and I finally put a needle/pin in there and the left side still seems clogged or something. I'm thinking it's bad and needs replacement since this thread came up.