anyone here with 20x10.5 +27 in the front ??
#16
Hey stupid trick! I know its not "rocker" science, why don't u come thru and help me hoe u know where I meet. U forget its my daily and I drive from downey to palmdale, and don't want to be dodging streets to get places, stop being a joto and give me more advice. That's it everyone that's not rolling w 10.5 in front needs to get out according to Chris lmao
#21
Registered User
iTrader: (15)
9.5 +27 will also definitely work with 245 or even 255 with tabs adjusted. I know this because I've tried.... although I forget what degree camber it was. I'm pretty sure it wasn't more than -2.5 tho'.
With Mark's suggested 20x10.5 +27 will mean that the wheels will poke out only 1mm more from the outside than my +15 offset setup, but he will have 21mm less in the inner clearance (about 1 inch) which also mean that it will only be 5mm less in the inner clearance from my original offset of 20x9.5 +35. Thus, if he choose to go with the same amount of stretch on the 10.5" vs. the 9.5", which is 245/35/20, I'm thinking this MIGHT be able to work.
I cannot be 100% positive about this, but it is my current theory based on what I've experienced and calculated.
Hope this helped, Mark.
Thread
Thread Starter
Forum
Replies
Last Post
Z1Motorsports
Suspension-Vendor
56
05-31-2020 01:56 PM