Aftermarket Rotors, Pads and Calipers
#1
Aftermarket Rotors, Pads and Calipers
I just got new rims on my '07 G35 and the OEM Rotors have a rusted ring that's visible. Can anyone give a good idea on pricing and where to find some good aftermarket rotors and calipers? I'm not looking to spend $1,500 or anything, but was wondering what I'd cost and if it's worth messing with? Perhaps just get new pads and call it good? Thanks in advance for the help.
Rusted ring....two thumbs down =(
Rusted ring....two thumbs down =(
#3
Registered User
iTrader: (3)
If your OEM rotors still have enough thickness, have them turned and then spray everything but the area where the pads rub w/ VHT flameproof paint, they have several colors and to cure it you just go through a few cycles of heavy braking to bake it on. Just tape off about 1/4" up into the pad area so you'll get a nice even ring once the pads scrape off the paint, you just don't want to paint the whole rotor as teh pads may get glazed if you get that whole area painted.
Here's mine before the pads scraped it off
And after, all cleaned from the pad contact
Here's mine before the pads scraped it off
And after, all cleaned from the pad contact
#5
#6
Super Moderator
iTrader: (3)
It is a fancy shiny upgrade that really doesn't upgrade your performance for daily driving.
Just remove your rotors and calipers and paint them with high temperature paint (after a good sanding and primer). Use a similar style of painting the rotor hat up to the pad line and you will get a nice even finish all the way around.
The following users liked this post:
LCC0256 (05-10-2015)
Thread
Thread Starter
Forum
Replies
Last Post
seagrasser
G35 Cars
17
05-03-2022 09:43 AM