906rwhp G35
#9
#10
Former G35driver Vendor
iTrader: (30)
Join Date: Dec 2004
Posts: 1,165
Likes: 0
Received 0 Likes
on
0 Posts
<object width="425" height="355"><param name="movie" value="http://www.youtube.com/v/g7d7L_z2XOA&hl=en"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/g7d7L_z2XOA&hl=en" type="application/x-shockwave-flash" wmode="transparent" width="425" height="355"></embed></object>
#11
Former G35driver Vendor
iTrader: (30)
Join Date: Dec 2004
Posts: 1,165
Likes: 0
Received 0 Likes
on
0 Posts
<object width="425" height="355"><param name="movie" value="http://www.youtube.com/v/4AXhAJs---M&hl=en"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/4AXhAJs---M&hl=en" type="application/x-shockwave-flash" wmode="transparent" width="425" height="355"></embed></object>
Darren
Darren
#14
#15
Former G35driver Vendor
iTrader: (30)
Join Date: Dec 2004
Posts: 1,165
Likes: 0
Received 0 Likes
on
0 Posts
^^ Yes and No.
The 11.00 pass and several other low 11.xx passes were made with the PowerLab GT37r (production kit), but they were all at 600whp. We did attempt a pass a couple of weeks after the low 11's with the 37 all in at ~720whp. In addition, we put a 28" tire out back and dropped the leave 400rpm. This resulted in us ripping the diff off it's mounts.
Food for thought: if this set up was in a Z, this pass would have been 10.6 - 10.8
All of this is covered in another thread. Thanks for your posts, but please don't [a s s]ume to know something to be true until you [read]. Thanks again.
Darrren
The 11.00 pass and several other low 11.xx passes were made with the PowerLab GT37r (production kit), but they were all at 600whp. We did attempt a pass a couple of weeks after the low 11's with the 37 all in at ~720whp. In addition, we put a 28" tire out back and dropped the leave 400rpm. This resulted in us ripping the diff off it's mounts.
Food for thought: if this set up was in a Z, this pass would have been 10.6 - 10.8
All of this is covered in another thread. Thanks for your posts, but please don't [a s s]ume to know something to be true until you [read]. Thanks again.
Darrren