I cant get the Injen to instal Cold air like i took off bumber and there is no hole to get it down to the bumber....i had to make it short ram...does anyone know how to do it or have ne pointer they can help me out with ?

 

Goto the Faq/Diy section, there is a great write-up on installing a Nismo CAI there which should answer alot of your questions. It is complete with great pictures and detailed instruction. The Injen should be similar to the Nismo as far as installation. It is the 2nd thread down.


2004 Coupe, 5AT, Twilight blue / Willow int. Clear corners, Hypers. 18's, Aero, tint, Premium.

 

What is the model number of the CAI you purchased? If you bought the RD1990 or the RD1992 you should have been able to do it with no problem without even removing the bumper.

--Steve

 

how do u tell wut model it is

 

side of the box. You need the RD1992 for the MT and the RD1990 for the AT.

 

i just wrote that up on your other post too. there are two types .let us know if u got it on and again don t forget the bypass valve

 

Yea, the Injen has to be almost identical to the Nismo:

350Z Performance Intake DIY


Black/Willow 03.5 6MT, Premium, Navi, Aero, SAT
350Z Nismo CAI