Mrev2
 

So I installed my MREV2 today, It took two 2 hours, with me cleaning some areas in the engine bay.

This is not a Thread for Do It Yourselfers, the MotorDyne Install Guide it petty much foolproof.

Pic1) Remove engine cover (Notice my red dip-stick ring) :D
Pic2) Remove intake tube:cool:
Pic3) Remove Upper Plenum and 3/8" spacer (Not that much oil, since the last time I cleaned in there.):rolleyes:
Pic4) Remove Lower Plenum. (All the air intakes for the heads on the drivers side, VERY DIRTY, and OILY):icon11: (Oil Catch Here WE Come)
Pic5) MREV2 in place, Stock to the side (Look at the runner) :eek3:

http://motordyneengineering.com/manual.pdf

Looks awesome, btw just curious are the grounding wires make a huge difference at all?

Power wise, No, I didn't buy them for that, I got them so the engines sensors and computers can run more efficient.

Scam Alert!!!
 

Hi Citymunky,

After carefull observation of your attached pictures, I am sorry to inform you that the "MREV2" you have shown top right attached picture is a low quality counterfit of the MREV2. Its not genuine.

https://g35driver.com/forums/attachm...5&d=1197604398

It is a fake. A fraud. A counterfit. It was not made by Motordyne.



Who sold you that lower plenum?


.

:eek: There are fakes for this too? And I was going to buy one used.... right.

Wow, nice catch Tony. Sucks to hear that he installed a counterfeit.

-Henry

.

Tony............ why are you removing all the posts????

I havn't removed anything.

But don't remove anything yourself. It will only be more incriminating. It has all been saved for evidence.

Moderators and Admin are informed.

I had no idea there were counterfeit. I guess the only way to buy it is straight through motordyne.

wow, im speechless

I see. It wasn't there before I looked, but you're right it's back. Wow too many post to keep up with!!!

Counterfeit??
 

I got my MREV2 from RebelinRI a Sponsor for My350Z.com. I Started a WTB Thread, and he replied.

http://www.my350z.com/forum/showthread.php?t=318269

^Apparently RebelinRI is manufacturing false MREV2's according to hydrazine, but I'm just speculating.

Yes, it is true.

Well, here's a pic of the MREV2 off of Motordyne's site:

http://motordyneengineering.com/imag...llector322.jpg

Here's a pic of RebinInRI's:

https://g35driver.com/forums/attachm...5&d=1197604398

The most obvious difference I see is that the tops of the front two intake runners on Rebel's plenum are chopped down a lot further than on the MREV, and the corners are very sharp. If we had a better quality pic of Rebel's, we may be able to see some more subtle discrepencies.

I know I've seen Rebel trying to buy lower collectors here and on my350z in the past.

Here are some links:
https://g35driver.com/forums/showthr...ighlight=lower
http://www.my350z.com/forum/showthre...ighlight=lower
http://www.my350z.com/forum/showthre...ighlight=lower
http://www.my350z.com/forum/showthre...ighlight=lower
http://www.my350z.com/forum/showthre...ighlight=lower

Of course, these don't prove that he was buying up a bunch of collectors, but the pattern tends to favor as much.

Rob, you do know that Tony has a patent on the item and a trademark on the name, right? If you're not selling actual MREV2s that were made by Motordyne Engineering, you could be in some deep doodoo .