MREV2 and 3/8" Installed with cell phone Pic's
#1
Mrev2
So I installed my MREV2 today, It took two 2 hours, with me cleaning some areas in the engine bay.
This is not a Thread for Do It Yourselfers, the MotorDyne Install Guide it petty much foolproof.
Pic1) Remove engine cover (Notice my red dip-stick ring)
Pic2) Remove intake tube
Pic3) Remove Upper Plenum and 3/8" spacer (Not that much oil, since the last time I cleaned in there.)
Pic4) Remove Lower Plenum. (All the air intakes for the heads on the drivers side, VERY DIRTY, and OILY)
(Oil Catch Here WE Come)
Pic5) MREV2 in place, Stock to the side (Look at the runner)
http://motordyneengineering.com/manual.pdf
This is not a Thread for Do It Yourselfers, the MotorDyne Install Guide it petty much foolproof.
Pic1) Remove engine cover (Notice my red dip-stick ring)
![Big Grin](https://g35driver.com/forums/images/smilies/biggrin.gif)
Pic2) Remove intake tube
![Cool](https://g35driver.com/forums/images/smilies/cool.gif)
Pic3) Remove Upper Plenum and 3/8" spacer (Not that much oil, since the last time I cleaned in there.)
![Roll Eyes (Sarcastic)](https://g35driver.com/forums/images/smilies/rolleyes.gif)
Pic4) Remove Lower Plenum. (All the air intakes for the heads on the drivers side, VERY DIRTY, and OILY)
![Icon11](https://g35driver.com/forums/images/smilies/icon11.gif)
Pic5) MREV2 in place, Stock to the side (Look at the runner)
![Eek3](https://g35driver.com/forums/images/smilies/eek3.gif)
http://motordyneengineering.com/manual.pdf
Last edited by citymunky; 12-26-2007 at 02:52 PM.
#3
#4
![Exclamation](https://g35driver.com/forums/images/icons/icon4.gif)
Hi Citymunky,
After carefull observation of your attached pictures, I am sorry to inform you that the "MREV2" you have shown top right attached picture is a low quality counterfit of the MREV2. Its not genuine.
![](https://g35driver.com/forums/attachments/intake-exhaust/81155d1197604398-mrev2-3-8-installed-cell-phone-pic-s-193173924741.jpg)
It is a fake. A fraud. A counterfit. It was not made by Motordyne.
Who sold you that lower plenum?
.
After carefull observation of your attached pictures, I am sorry to inform you that the "MREV2" you have shown top right attached picture is a low quality counterfit of the MREV2. Its not genuine.
![](https://g35driver.com/forums/attachments/intake-exhaust/81155d1197604398-mrev2-3-8-installed-cell-phone-pic-s-193173924741.jpg)
It is a fake. A fraud. A counterfit. It was not made by Motordyne.
Who sold you that lower plenum?
.
#7
Trending Topics
#8
#10
#12
Counterfeit??
Originally Posted by Hydrazine
Hi Citymunky,
After carefull observation of your attached pictures, I am sorry to inform you that the "MREV2" you have shown top right attached picture is a low quality counterfit of the MREV2. Its not genuine.
![](https://g35driver.com/forums/attachments/intake-exhaust/81155d1197604398-mrev2-3-8-installed-cell-phone-pic-s-193173924741.jpg)
It is a fake. A fraud. A counterfit. It was not made by Motordyne.
Who sold you that lower plenum?
.
After carefull observation of your attached pictures, I am sorry to inform you that the "MREV2" you have shown top right attached picture is a low quality counterfit of the MREV2. Its not genuine.
![](https://g35driver.com/forums/attachments/intake-exhaust/81155d1197604398-mrev2-3-8-installed-cell-phone-pic-s-193173924741.jpg)
It is a fake. A fraud. A counterfit. It was not made by Motordyne.
Who sold you that lower plenum?
.
http://www.my350z.com/forum/showthread.php?t=318269
#15
Well, here's a pic of the MREV2 off of Motordyne's site:
![](http://motordyneengineering.com/images/350ZG35M35ModifiedCollector322.jpg)
Here's a pic of RebinInRI's:
![](https://g35driver.com/forums/attachments/intake-exhaust/81155d1197604398-mrev2-3-8-installed-cell-phone-pic-s-193173924741.jpg)
The most obvious difference I see is that the tops of the front two intake runners on Rebel's plenum are chopped down a lot further than on the MREV, and the corners are very sharp. If we had a better quality pic of Rebel's, we may be able to see some more subtle discrepencies.
I know I've seen Rebel trying to buy lower collectors here and on my350z in the past.
Here are some links:
https://g35driver.com/forums/showthr...ighlight=lower
http://www.my350z.com/forum/showthre...ighlight=lower
http://www.my350z.com/forum/showthre...ighlight=lower
http://www.my350z.com/forum/showthre...ighlight=lower
http://www.my350z.com/forum/showthre...ighlight=lower
Of course, these don't prove that he was buying up a bunch of collectors, but the pattern tends to favor as much.
Rob, you do know that Tony has a patent on the item and a trademark on the name, right? If you're not selling actual MREV2s that were made by Motordyne Engineering, you could be in some deep doodoo .
![](http://motordyneengineering.com/images/350ZG35M35ModifiedCollector322.jpg)
Here's a pic of RebinInRI's:
![](https://g35driver.com/forums/attachments/intake-exhaust/81155d1197604398-mrev2-3-8-installed-cell-phone-pic-s-193173924741.jpg)
The most obvious difference I see is that the tops of the front two intake runners on Rebel's plenum are chopped down a lot further than on the MREV, and the corners are very sharp. If we had a better quality pic of Rebel's, we may be able to see some more subtle discrepencies.
I know I've seen Rebel trying to buy lower collectors here and on my350z in the past.
Here are some links:
https://g35driver.com/forums/showthr...ighlight=lower
http://www.my350z.com/forum/showthre...ighlight=lower
http://www.my350z.com/forum/showthre...ighlight=lower
http://www.my350z.com/forum/showthre...ighlight=lower
http://www.my350z.com/forum/showthre...ighlight=lower
Of course, these don't prove that he was buying up a bunch of collectors, but the pattern tends to favor as much.
Rob, you do know that Tony has a patent on the item and a trademark on the name, right? If you're not selling actual MREV2s that were made by Motordyne Engineering, you could be in some deep doodoo .