Plenum Installation Info
Joined: Aug 2002
Posts: 1,129
Likes: 0
From: Hi Desert, Kalifornia
Plenum Installation Info
Here's a picture of the plenum bolt tightening sequence.
The torque values are 9-10 ft/lbs for the hold down bolts and 64-85 in/lbs for the throttle body bolts. These number should also be good for Crawford's plenum.
Kinetix specs 36 in/lbs for their plenum's hold down bolts. No throttle body bolt specs found.
DaveO - 2003 G35 Sedan / DP / Willow / AT / Premium / Sport
350Z Engine Cover, T-Stat & Air Duct / Stillen CAI
GG 7-Wire H-G Kit / TS ECU / E-Fans
Street Edge TC / B&M Cooler / Stillen Exhaust
202465-100_0002.JPG
The torque values are 9-10 ft/lbs for the hold down bolts and 64-85 in/lbs for the throttle body bolts. These number should also be good for Crawford's plenum.
Kinetix specs 36 in/lbs for their plenum's hold down bolts. No throttle body bolt specs found.
DaveO - 2003 G35 Sedan / DP / Willow / AT / Premium / Sport
350Z Engine Cover, T-Stat & Air Duct / Stillen CAI
GG 7-Wire H-G Kit / TS ECU / E-Fans
Street Edge TC / B&M Cooler / Stillen Exhaust
202465-100_0002.JPG
Thread
Thread Starter
Forum
Replies
Last Post
Z1Motorsports
Suspension-Vendor
56
May 31, 2020 01:56 PM
RA102223
Engine, Drivetrain & Forced-Induction
1
Aug 15, 2015 09:24 PM
