Motordyne spacer's
#1
Motordyne spacer's
So here's the delema. I'm thinking of getting a motordyne spacer, but I don't know what to get. 5/16" or 1/2"..? So besides the fact that by installing a 1/2" spacer you can't run a strut bar what are the other pros and cons. As far as HP and TQ what's the difference?. BTW my g is a 04 m/t with a stillen z-tube and k&n drop in, on the 04 oem airbox. I also seen the intake runners spacer anyone have good turn out with that?
#3
I drove ttrank's car solo
iTrader: (50)
Join Date: Mar 2009
Location: By the sea, Tx
Posts: 18,299
Received 1,486 Likes
on
1,221 Posts
G35 sedan w/ too much money in mods
Well put. Also the debate on throttle body spacers always generates drama. Some swear they work, and some laugh at the thought. Hard to know who to believe, but they are hard to find which tells me they aren't super productive or more companies would promote and sell them. I think Tony at MD dyno tested them and they showed no gains, but I couldn't find the thread to confirm that.
#4
You should be able to have the GT Spec strut bar... but no plenum cover. Though I have 5/16" in my 04 coupe with an MREV2 lower plenum, there is enough in the adjustment to accomodate the extra height.
The difference between the spacers as mentioned above is not that different unless you plan serious NA mods and a tune. If so, go with the 1/2". Tune is good regardless.
The difference between the spacers as mentioned above is not that different unless you plan serious NA mods and a tune. If so, go with the 1/2". Tune is good regardless.
#5
Good. I want the mid range power and do plan on a NA build. So I guess I should go with the 1/2" and get a tune. So what's ur guys opinion on the most gains na build ? HFC's, headers, MD spacer, port and polish? What am I missing? Yea I also did some research on the runners spacer I'm gonna skip on that.
#6
#7
Trending Topics
#10
"better gains" is a very arbitrary method of judgement. It is very well known that the 1/2" spacer will provide more TOTAL TOP END power, so if you just want maximum power for dyno or if you are always racing around in the very top of your powerband that might be a good option. But 5/16" provides much more usable,mid range power which for 99%+ of people on this forum would be used/noticed more often.
#11
#12
#13
#15
Where is any type of documentation or even theory on why the tune would cause the 5/16's gains to not be as considerable any longer while the 1/2's would skyrocket? You do realize how a standard tune works right? We aren't talking about a super indepth tune that would take hundreds of hours and many thousands of dollars here, if even then there was a difference then.