Show me your exhaust pics!
Yes, I know I can do a search, but I'd like to see everyones exhaust pics. Coupe or Sedan. Pics of it on the car, and off the car before the install, like just the pieces if you have it.
I want the pics and info to make an exhaust page for quick, easy refrence. http://www.int-auto.com/exh_g35.htm Also post a review and the specs(piping/tip dia.) if you have them, if not, most manufacturers list that kinda stuff on their websites. https://hometown.aol.com/greddysetgo/images/banner.jpg |
Stillen Cat-back:
http://memimage.cardomain.net/member...39_15_full.jpg http://memimage.cardomain.net/member...39_14_full.jpg Personally, I love the exhaust! I did a lot of research and I heard nothing but good things about this exhuast (except the fact that it is slightly heavier then stock as well as it be kinda pricey). The sound is awesome as well, highly reccommended! |
Any non-CarDomain pics? Or pics of the underside?
|
Nope, I just have the car domain pics. I have not taken any underside ones, although that does not sound like a bad idea.
|
No one else has any pics of their exhaust?
|
Here's the HKS: https://g35driver.com/forums/showthr...&highlight=hks
|
Borla underside pics with Magnaflow resonators added
3 Attachment(s)
Got rid of the drone (most of it anyways...) with the resonators. This was on my 03 which I have sold. I now have an 05 and won't be putting the exhaust back on so it is for SALE if anyone is interested... located in Vancouver.
|
Very nice guys, keep 'em coming!
|
3 Attachment(s)
Invidia G200 with an "H" Pipe.
Lou |
Originally Posted by GReddySetGO
No one else has any pics of their exhaust?
|
Posted before on another thread, Fujitsubo.
http://img.photobucket.com/albums/v4...3/DSC00035.jpg http://img.photobucket.com/albums/v4...3/DSC00034.jpg |
|
3 Attachment(s)
Here's Stillen on my sedan.
|
So far so good guys, nice pics!
|
man i want the fuji exhaust so bad!
|
3 Attachment(s)
The sound of the Stillen Muffler was driving me nuts so I cut it off and put on a pair of Magnaflow 2.5" stainless straight through 14"x8" oval offset mufflers. (Part # 14211) These Magnaflows are typically used on the Mustang Cobras so flow restriction is not an issue. The sound is clearly quieter, milder and smoother. There is also much less back pressure than the Stillen muffler had.
WOT, 4th gear @ redline, the Stillen muffler produced 2.8 psid just upstream of the muffler inlet. WOT, 4th gear @ redline, the Magnaflow mufflers produced 0.19 psid upstream of the muffler inlet. A big improvement. Less noise and less back pressure with the Magnaflows... Who would have though less noise and better performance could go together? BTW, the Stillen tips are really nice. I cut them off and welded them onto the Magnaflows. The Stillen muffler went into the trash. For specific muffler details see: MAGNAFLOW 14211 I did a lot of research on the muffler and found a really good price. $75 each. Tony |
4 Attachment(s)
Here are some pics of the straight pipes I tried for a while.
The pressure drop was immeasurable. The sound was beautifuly loud. You could hear every detail of sound flowing out of the VQ. And I had to be very careful around the cops. Man this stuff was Hell on Wheels. After a while the sound would chew your ears like Mike Tyson on PCP. :D I'll have to try this once again but with the test pipes installed. :eek: |
I was thinking of doing something like this cause my wife now refuses to ride in the car. Does it get rid of the droning when cruising on the freeway? If you were to rate the loudness compared to the Stillen muffler - say 1 to 10 w/ Stillen being 10 - where would it fall? Also, what part # are the Magnaflows? I may just do the same to my Stillen exhaust.
Thanks for the great info Tony.
Originally Posted by Hydrazine
The sound of the Stillen Muffler was driving me nuts so I cut it off and put on a pair of Magnaflow 2.5" stainless straight through 14"x8" oval offset mufflers. These Magnaflows are typically used on the Mustang Cobras so flow restriction is not an issue. The sound is milder and smoother. There is also much less back pressure than the Stillen muffler had.
WOT, 4th gear @ redline, the Stillen muffler produced 2.8 psid just upstream of the muffler inlet. WOT, 4th gear @ redline, the Magnaflow mufflers produced 0.19 psid upstream of the muffler inlet. A big improvement. Less noise and less back pressure with the Magnaflows... Who would have though less noise and better performance could go together. BTW, the Stillen tips are really nice. I cut them off and welded them onto the Magnaflows. The Stillen muffler went into the trash. Tony |
3 Attachment(s)
pro-1 with UT y pipe
|
Originally Posted by kegels
I was thinking of doing something like this cause my wife now refuses to ride in the car. Does it get rid of the droning when cruising on the freeway? If you were to rate the loudness compared to the Stillen muffler - say 1 to 10 w/ Stillen being 10 - where would it fall? Also, what part # are the Magnaflows? I may just do the same to my Stillen exhaust.
Thanks for the great info Tony. And yes, the magnaflow reduced the sound considerably. With Stillen being a 10 and Stock being a 1, I would rate the loudness a 5 and the drone a 4. And the difference isn't subtle either. You will notice it the moment you start the car. Although its not as quiet as stock, the difference is readily apparent and a welcome relief. I also think the new sound Q is greatly improved over the Stillen. Deeper and mellower but with with a little zing to make it interesting. I've had several unsolicited, positive comments on the sound Q from people who were unfamiliar with the G35. My wife is happier too! :D MAGNAFLOW 14211 |
UT Y-PIPE, MID-PIPE W/ MAGNA FLOW RESIGNATOR, MAGNA FLOW MUFFLER
http://i6.photobucket.com/albums/y20...ICTURES038.jpg |
You the man Tony!
This is exactly what I was looking for. I found some on e-bay for $70 apiece. Will be putting them on as soon as I receive them. Again, a big thumbs up for this info! :)
Originally Posted by Hydrazine
I've had a lot of people with Stillen exhausts ask me the same question. The Stillen muffler is painfull. Even if it was half as quiet the midrange/monochomatic/drone quality of sound is a turn off. (don't mean to offend any Stillen owners here. ;) )
And yes, the magnaflow reduced the sound considerably. With Stillen being a 10 and Stock being a 1, I would rate the loudness a 5 and the drone a 4. And the difference isn't subtle either. You will notice it the moment you start the car. Although its not as quiet as stock, the difference is readily apparent and a welcome relief. I also think the new sound Q is greatly improved over the Stillen. Deeper and mellower but with with a little zing to make it interesting. I've had several unsolicited, positive comments on the sound Q from people who were unfamiliar with the G35. My wife is happier too! :D MAGNAFLOW 14211 |
Am I correct in saying that the "Stillen droning" seems to be more of a problem with the sedan than the coupe?
|
Injen SES
|
|
Originally Posted by ducatiguy
The NEW Big Bertha system!
|
Originally Posted by TheCutter
Am I correct in saying that the "Stillen droning" seems to be more of a problem with the sedan than the coupe?
|
TTT.
Question, do most of these exhausts have resonators in them or have those been eliminated? I know theres a lot more exhausts out there that haven't been posted yet. Just a few more and I'll show you guys the progress of the page :D |
True Dual
1 Attachment(s)
Borla
|
1 Attachment(s)
Tanabe from a 350z
|
OK. I'm still updating the specs and am going to start adding the pics soon. Heres what its like so far:
http://www.int-auto.com/exh_g35.htm Please give me any missing information that you may have, thanks! |
sweet Danny, thanks man for your help. But you forgot one exhaust, the BIG BERTHA SYSTEM. LOL
|
another Injen SES
|
dang... i didn't know there were so many exhausts for the g35.. great idea!
|
Fujit looks great... i'm seriously consider in getting that..
|
anybody have the amuse r1? :D
|
1 Attachment(s)
HKS HiPower
|
Originally Posted by GReddySetGO
Yes, I know I can do a search, but I'd like to see everyones exhaust pics. Coupe or Sedan. Pics of it on the car, and off the car before the install, like just the pieces if you have it.
I want the pics and info to make an exhaust page for quick, easy refrence. http://www.int-auto.com/exh_g35.htm Also post a review and the specs(piping/tip dia.) if you have them, if not, most manufacturers list that kinda stuff on their websites. https://hometown.aol.com/greddysetgo/images/banner.jpg A suggestion. Check out www.SportZMagazine.com and click on the Downloads. I believe you'll find some interesting info from our Exhaust Shootout. |
1 Attachment(s)
greddy sp2
|
Originally Posted by coupeondubs
greddy sp2
Did you get a new y-pipe to go along with the SP2? |
1 Attachment(s)
Danny I posted this on your other thread, but I'll post here too.
Greddy EVO from the Rear on a lift. |
Piece-meal sedan exhaust
2 Attachment(s)
OK Here we go, you wanted pictures: JIC Y-Pipe, Coupe Mid-Pipe, HKS muffler. I installed the UR Pulley at the same time(different forum)
I like it alot. :D :D Here is the stock and JIC Y-Pipe and the stock and coupe Mid-Pipe. Ray |
Part II
2 Attachment(s)
Stock and HKS Exhaust and the complete thing side-by-side
|
Part 3
2 Attachment(s)
Installed on car. One of the Rubber hangers was missing from the adapter kit I got, so it is jury rigged for now. It is hanging a bit low on the inboard side.
Ray |
|
one of the nicest looking exhaust and nice M5 too!!!
|
thanks :)
|
1 Attachment(s)
Originally Posted by Hydrazine
The sound of the Stillen Muffler was driving me nuts so I cut it off and put on a pair of Magnaflow 2.5" stainless straight through 14"x8" oval offset mufflers. (Part # 14211) These Magnaflows are typically used on the Mustang Cobras so flow restriction is not an issue. The sound is clearly quieter, milder and smoother. There is also much less back pressure than the Stillen muffler had.
WOT, 4th gear @ redline, the Stillen muffler produced 2.8 psid just upstream of the muffler inlet. WOT, 4th gear @ redline, the Magnaflow mufflers produced 0.19 psid upstream of the muffler inlet. A big improvement. Less noise and less back pressure with the Magnaflows... Who would have though less noise and better performance could go together? BTW, the Stillen tips are really nice. I cut them off and welded them onto the Magnaflows. The Stillen muffler went into the trash. For specific muffler details see: MAGNAFLOW 14211 I did a lot of research on the muffler and found a really good price. $75 each. Tony This is a great find! I think if I go for the Cats I'll seriously consider it. For now the new Stillen Catback hasn't gotten on my nerves yet. |
Originally Posted by Xman
Tony,
This is a great find! I think if I go for the Cats I'll seriously consider it. For now the new Stillen Catback hasn't gotten on my nerves yet. |
The new Stillen sound is great. But if I load the car up with the fam and luggage I predict nervous breakdown after a long vacation drive (lol). What's most impressive to me is your pressure data.
|
All times are GMT -4. The time now is 09:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands