How do you get to that bolt on the drivers side cat. The one on the backside near the stearing column(the hardest one to get to on this install). I can get the socket over the nut, but have no room to move the breaker bar. I don't really want to remove the stearing column to get to it. Any help would be great, otherwise I'll take to a shop.

 

We had a 24 inch extension on a regular socket wrench and we were able to get it loose.

 

I went from underneath and put the socket over the nut. Then i went from above and used 3 extensions and plugged them into the socket. I still couldn't break it loose but I have some new ideas from the board and I'm going to try the install again next week.