my "service engine soon" light is on,after i installed the cold air,is this normal ?

 

no, it s not. hope you didn t damage the m.a.s. that is 700.00 bucks in it s own. i know mine went last month but luckilly i m cool with the manager and he replaced it under warranty.

 

double check to make sure that the maf sensor was put back the same direction that it came out... someone correct me if i am wrong, but i believe that the maf sensor is directional. could solve your problem... good luck

 

Yea its normal just do a ECU reset and the MAF has an arrow for the air flow

 

due it s not normal for the light to come on. make sure its facing the right way and also make sure that the plug is in all the way. good luck

 

My check engine light came on after I installed the Injen Intake do a search its common after you install something that affects the Air Intake its thinking its getting too much air. Just serach for ECU reset you can take it to AutoZone and they check codes for you. Im like 80% sure its becuase you just installed the intake needs an ECU reset

 

Heres the link to ECU RESET

Heres another member that had the same problem after he installed his AEM intake.

Heres another member with an Injen Intake with the same problem.

 

Mine came on as well, after my Injen install. I was lazy and didn't get a chance to search for those ECU reset instructions. It went away by itself w/o me noticing...prob w/in a week or so?

 

The Injen also causes problems with the car. It mostly seems to cause the car to die if you push in the clutch rolling to a stop.

 

i have mine on for 2 1/2 years and no s.e.s light. i guess i m lucky. good ;uck though

 

not that safe...if you have injen CAI.
on the good side...its good
but IMO its bit risky...