I'm about to order the mesh inserts for the nismo bumper, but my bumper is already installed without it. Does anyone know a way to install the mesh without having to remove the bumper? If so, please provide detailed instructions.

 

no. to do it correctly you have to remove the bumper. you coud remove the undertray and try to get access behind the bumper from underneath but it'll be tight.

 

Remove the bumper to do it right... It only takes 15 - 20 mins.

 

+ 1 remove it for best result and hassel free

 

Just remove it and get it done right.

If you going to drill the holes and put screws in you GOT to remove the bumper. There is just not enough room behind it to get the drill in there.

 

what mesh inserts are you going with?

 

The ones from customautomesh.com (recommended?).

 

yes. good stuff. i have the same mesh. just make sure it's very secure or it will come loose and the mesh will bend in the wind and look like crap. (like mine) i need to adjust it.

 

^How did you attach yours?

 

the shop did it. i'm assuming they used self tapping screws. hopefully. there were specific spots around the vents of the kuruma where the surface was extened so you could put screws in.

 

Ahhhhh It's Kuruma

BIG vent. You can see all the flaws in it.

Nismo is not that revealing.

 

i sell mesh for the nismo bumper same quality for a fraction of the cost. pm me for details

 

itll be almost impossible to do it without removing the bumper

 

So does the authentic nismo bumper come w/ mesh or not?

 

not sure but I don't think so.