Who's down for a black roof Overlay?
#17
08-24-2007 | 07:52 PM
#18
08-24-2007 | 08:32 PM
Originally Posted by Blue_Batmobile
There will be both sunroof and non sunroof versions guys 
. As far as cf goes, its just the generic cf vinyl I use, however, the stuff's not cheap! I'll need to look into cost effectiveness on the cf 
.
Bat™
. As far as cf goes, its just the generic cf vinyl I use, however, the stuff's not cheap! I'll need to look into cost effectiveness on the cf .Bat™
#21
08-25-2007 | 02:50 AM
#23
08-25-2007 | 01:41 PM
Originally Posted by Blue_Batmobile
I wont have the actual kit yet Ryan. Most of my time there will be getting the template down right. I should have it ready early next week .
Bat™
.Bat™
Polished Black or Flat Black everyone
#26
08-25-2007 | 02:37 PM
Hmmmm...
This would be interesting. I'd be interested in it as well, but I'm curious as to accomodations for those who have sat radio, for those who don't, those who have sunroofs, and those who don't.
I guess if you're going to do it in 2 pieces and you're going to split it after the sunroof, then you can piece together different combinations and avoid having too many different templates.
Like having a front piece in 2 templates. One for "with" and one for "without" sunroof. Then you have the rear piece in 2 templates. One with the sat antenna, and one without.
But then again, there are different styles of sat radio antennas. Like the 06+ with small antenna and 05- with large antennas. Maybe you can just have the customer cut the antenna part themselves. It's a small enough piece for a diy.
This would be interesting. I'd be interested in it as well, but I'm curious as to accomodations for those who have sat radio, for those who don't, those who have sunroofs, and those who don't.
I guess if you're going to do it in 2 pieces and you're going to split it after the sunroof, then you can piece together different combinations and avoid having too many different templates.
Like having a front piece in 2 templates. One for "with" and one for "without" sunroof. Then you have the rear piece in 2 templates. One with the sat antenna, and one without.
But then again, there are different styles of sat radio antennas. Like the 06+ with small antenna and 05- with large antennas. Maybe you can just have the customer cut the antenna part themselves. It's a small enough piece for a diy.
#29
08-26-2007 | 02:26 PM
Matte black is pretty much out of the questions, I dont want it to look primed 
. CF in this big an area would just look too tacky imo, plus it wouldnt be cost effective for me. I made the kit yesterday and refined everything today. I should have the first kit cut for Ryan Monday or Tuesday. If I'm happy with fitment, I can have this available as early as late next week .
As far as cost goes, I'm not sure yet. These will need to be shipped in a large mailing tube, gotta see cost of vinyl...I'm actually thinking of doing ths for my NSX.
It will be available for moonroof equipped and non moonroof equipped Coupes. As far as those with satellite radio antennas, I'm going to have to look into it further.
Bat™
. CF in this big an area would just look too tacky imo, plus it wouldnt be cost effective for me. I made the kit yesterday and refined everything today. I should have the first kit cut for Ryan Monday or Tuesday. If I'm happy with fitment, I can have this available as early as late next week .As far as cost goes, I'm not sure yet. These will need to be shipped in a large mailing tube, gotta see cost of vinyl...I'm actually thinking of doing ths for my NSX
.It will be available for moonroof equipped and non moonroof equipped Coupes. As far as those with satellite radio antennas, I'm going to have to look into it further.
Bat™
#30
08-26-2007 | 05:19 PM
