help - window issues with new motor installation
#1
help - window issues with new motor installation
Hi i was hoping someone could give me some advice
firstly, i have a 2003 V35 350GT skyline which has been imported from japan to australia. its essentially the same car as your G35.
now we are also plagued with window motor problems. previously i have been having issues with the window motor. it would sometimes not work and only when i bashed the inside of the door would it decide to work. apart rom that all the functions worked fine.
now, i decided to buy a new motor and bought one off jason at riverside infiniti through eBay. the motor arrived a while back and i instaleld it today.
i took off the trim, replaced the motor, did the reset procedure, then re-installed the trim.
the motor now works 100% of the time, but now the pinch system seems to not be working. i now find that the auto-up feature doesn't work (it hits the top and rolls down halfway) and the feature that rolls the window down 10mm when you open the door is also inactive.
its a brand new motor so unlikely that its a problem with that. is the regulator part of the motor? have i done something wrong with the installation?
obviously as its imported from japan i have no warranty which is why i am doing this myself... so taking it to a dealer is an absolute last resort.
any advice would be much appreciated!
regards,
Warren
firstly, i have a 2003 V35 350GT skyline which has been imported from japan to australia. its essentially the same car as your G35.
now we are also plagued with window motor problems. previously i have been having issues with the window motor. it would sometimes not work and only when i bashed the inside of the door would it decide to work. apart rom that all the functions worked fine.
now, i decided to buy a new motor and bought one off jason at riverside infiniti through eBay. the motor arrived a while back and i instaleld it today.
i took off the trim, replaced the motor, did the reset procedure, then re-installed the trim.
the motor now works 100% of the time, but now the pinch system seems to not be working. i now find that the auto-up feature doesn't work (it hits the top and rolls down halfway) and the feature that rolls the window down 10mm when you open the door is also inactive.
its a brand new motor so unlikely that its a problem with that. is the regulator part of the motor? have i done something wrong with the installation?
obviously as its imported from japan i have no warranty which is why i am doing this myself... so taking it to a dealer is an absolute last resort.
any advice would be much appreciated!
regards,
Warren
#2
#3
ok i did the reset procedure again, but alas the procedure in the workshop manual is around the wrong way!
for everyone's reference, to reset the motor
- take the door trim off
- close the door and sit inside the car (the door needs to be closed as there is a sensor)
- peel back the black sticker about right in the middle of the door to reveal the reset button
- close the window completely
- press and hold the button
- open the window manually (using the first click not the second click)
- when the window has fully opened release the switch then release the button
- check that the auto-up now works!
thanks to jason for his help!
mods feel free to close this thread..
for everyone's reference, to reset the motor
- take the door trim off
- close the door and sit inside the car (the door needs to be closed as there is a sensor)
- peel back the black sticker about right in the middle of the door to reveal the reset button
- close the window completely
- press and hold the button
- open the window manually (using the first click not the second click)
- when the window has fully opened release the switch then release the button
- check that the auto-up now works!
thanks to jason for his help!
mods feel free to close this thread..
#4
Thanks for the info. I have been putting this off for a few months now. With winter, who cares?
How difficult is it to take off the trim? I haven't even looked yet. Any other tips?
I am printing your reset procedure now. Also I am debating about getting a motor from Autozone w/lifetime warranty. Did you look into that before choosing infiniti part? I am definitely not taking to dealer also
How difficult is it to take off the trim? I haven't even looked yet. Any other tips?
I am printing your reset procedure now. Also I am debating about getting a motor from Autozone w/lifetime warranty. Did you look into that before choosing infiniti part? I am definitely not taking to dealer also
#6
taking off the door trim to get the the reset button was a 5 minute job, requiring only a 10mm ratchet and only 3 bolts to be removed!
getting to the motor however required about another 15 bolts to be removed, but only the 10mm ratchet and a 12mm head also for the final 2 bolts. still pretty easy but more time consuming.
re the price, well being in Australia i went for the most trusted option as i'm probably not going to get any warranty on parts when they are sent across the world!
getting to the motor however required about another 15 bolts to be removed, but only the 10mm ratchet and a 12mm head also for the final 2 bolts. still pretty easy but more time consuming.
re the price, well being in Australia i went for the most trusted option as i'm probably not going to get any warranty on parts when they are sent across the world!
Thread
Thread Starter
Forum
Replies
Last Post
will091195
General Tech Questions
1
07-27-2015 09:19 PM