How much to prep, paint and install??
How much to prep, paint and install??
i recently bought the greddy front and sides from erik klumzee, i took it to a body shop to get put on, was wondering what i should be paying around for the prep painted and install????
Paid $1200 OTD for Kuruma Z front and klumyzee Impul sides. Would've been a bit less if the Kuruma Z wasn't such a pain to prep and paint. Of course this is in the Maryland/DC area where prices for these things are inflated like crazy.
It really, completely, depends on what shop you go to. Some shops are super critical and charge lots of $ for labor, some shops work faster, cut corners, and are cheaper. Some shops are cheaper and good, some are expensive and bad, it really depends, lol!
Former G35driver Vendor
iTrader: (93)
Joined: Sep 2004
Posts: 9,524
Likes: 3
From: So. Cali - Rowland Hts
Depends where you are and the experience the bodyshop has with fiberglass / poly urethane parts
the parts you have are all fiberglass and there really isnt much to it except cleaning the surface -> primer -> paint
you should be paying around $600-$800 if you're in southern california, unfortunally I cant speak for everyone else outside of this market
the parts you have are all fiberglass and there really isnt much to it except cleaning the surface -> primer -> paint
you should be paying around $600-$800 if you're in southern california, unfortunally I cant speak for everyone else outside of this market
Thread
Thread Starter
Forum
Replies
Last Post
dougk12
Brakes
6
Feb 26, 2016 10:26 PM





