My Build.....Clean and Simple
#23
09-15-2010 | 03:19 PM
NICEEEEEE... i hating on the rims.. wishes my lips were anywhere close to yours.. dammmm...
#25
09-16-2010 | 10:08 PM
#27
09-16-2010 | 10:29 PM
Joined: Feb 2010
Posts: 5,249
Likes: 430
From: Houston
Itasha Coupe
^^ I will have to agree with Kevin. Your car looks great, don't get me wrong, but with a 20x11 wheel and your offset, I would have stretched a 265/35 instead of a 275/35.
But regardless tho, when you get your camber arms on, you can correct it with a little bit of camber. I like the deep lips on the reverse lip. I would have gone with a 20x11 for my rear set up as well, but they don't make them in step lip. FML.
Edit: Why does your front bumper mesh look so strange? Did you get that separately? Or is that what came with it? Because the mesh that I got from Concept Z Performance is WAY WAY different from what you have.
But regardless tho, when you get your camber arms on, you can correct it with a little bit of camber. I like the deep lips on the reverse lip. I would have gone with a 20x11 for my rear set up as well, but they don't make them in step lip. FML.
Edit: Why does your front bumper mesh look so strange? Did you get that separately? Or is that what came with it? Because the mesh that I got from Concept Z Performance is WAY WAY different from what you have.
Last edited by XiN; 09-16-2010 at 10:33 PM.
#29
09-17-2010 | 10:39 PM
^^ I will have to agree with Kevin. Your car looks great, don't get me wrong, but with a 20x11 wheel and your offset, I would have stretched a 265/35 instead of a 275/35.
But regardless tho, when you get your camber arms on, you can correct it with a little bit of camber. I like the deep lips on the reverse lip. I would have gone with a 20x11 for my rear set up as well, but they don't make them in step lip. FML.
Edit: Why does your front bumper mesh look so strange? Did you get that separately? Or is that what came with it? Because the mesh that I got from Concept Z Performance is WAY WAY different from what you have.
But regardless tho, when you get your camber arms on, you can correct it with a little bit of camber. I like the deep lips on the reverse lip. I would have gone with a 20x11 for my rear set up as well, but they don't make them in step lip. FML.
Edit: Why does your front bumper mesh look so strange? Did you get that separately? Or is that what came with it? Because the mesh that I got from Concept Z Performance is WAY WAY different from what you have.
Believe it or not a 275/30 has more stretch than a 265/35 or a 265/30. I know your prob thinking yeah right but when you go to buy tires look at the overall section width of the tire. That tells you what the tires overall width sidewall to sidewall on the rim. Of course the larger the rim, the larger the width increases so you want to select a tire that has a smaller width aka resulting in more stretch.......
Heres the math just if your curious for an 11 inch rim:
265/35 = 10.7in on 9.5in rim + 1.5in = 12.2in overall width sidewall to sidewall
255/35 = 10.2in on 9in rim + 2in = 11.2in overall width sidewall to sidewall
275/30 = 10.4in on 9.5in rim + 1.5in = 11.9in overall width sidewall to sidewall
I was going 255/35 but general has discontinued thaat size for now and 265/35 was almost 200 a tire!!
Tusday I get my rear camber amrs and toe arms and gonna self adjust until my front s come in which will be maxed no matter what
