Rebadging G35 Coupe
#1
Join Date: Jun 2010
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Rebadging G35 Coupe
The G35 coupe I recently bought was debadged. I've purchased the badges (thanks Beshoff) and feel fairly confident putting them on. There's a small outline of the Mt Fuji emblem, so I don't have a problem with that. For the "I N F I N I T I" and "G35" badges, I plan on using a magnetic level and some painter's tape as an underline to make sure they're even.
My question:
I can't see outlines for the "G35" or "I N F I N I T I" badges. Can anyone help me out on the pricise location for these? I'd very much appreciate it
Also, I know most people use double sided tape. I bought an adhesive-like glue for the used Mt. Fuji emblem I got. Do you guys think I'll be ok?
My question:
I can't see outlines for the "G35" or "I N F I N I T I" badges. Can anyone help me out on the pricise location for these? I'd very much appreciate it
Also, I know most people use double sided tape. I bought an adhesive-like glue for the used Mt. Fuji emblem I got. Do you guys think I'll be ok?
Last edited by hoosierg35; 06-23-2010 at 10:34 PM.
#3
N F I N I T is 2" up from the bottom edge of the trunk
Both the I's are 1/8" higher(2.125")
The I's are 4" from the bottom corner of the trunk
The letters have 1.125" between them
I shaved my G35 emblem but Id guess it was 1" down from the trunk line where it goes from top to back and about 3" from the right edge
If youre clever you could find the INFINITI text online and print it to scale. Then cut out the letter roughly on the paper and tape that to the car and place the letter that way, like a template
Both the I's are 1/8" higher(2.125")
The I's are 4" from the bottom corner of the trunk
The letters have 1.125" between them
I shaved my G35 emblem but Id guess it was 1" down from the trunk line where it goes from top to back and about 3" from the right edge
If youre clever you could find the INFINITI text online and print it to scale. Then cut out the letter roughly on the paper and tape that to the car and place the letter that way, like a template
Last edited by G2FLIP4; 08-13-2010 at 05:18 PM.
Thread
Thread Starter
Forum
Replies
Last Post
laksjd84
Steering & Suspension
16
07-12-2017 12:22 AM
laksjd84
Exterior - Body Parts
1
07-24-2015 05:12 PM