My Interior Project in the Works
Here are the door panels apart for coating. I was just going to tape of the door panel parts but I just didnt think they would come out as good if they were taken apart. The front seats are done and just need the protective coat. All pieces should be done with the protective coat tomorrow, and then I need to wait 48 hours before installing. Its getting close.




The seats look even better in person. 
Yea thanks man, I loved that M3. I totally regret selling it.

Yea thanks man, I loved that M3. I totally regret selling it.
Everything that was dyed is now done and just left to dry for a day. Now on to the DD bezel. As you know the JDM trim whole is a little bit bigger then the headunit and I didnt want to order and wait for the bezel to come in, so I went to walmart and bought a trim ring for a honda civic and will mold it in and make it work. Here are some pics of the process.
Also does anyone know which wire is the speed signal wire(vss). Doesnt matter which one. Either behind the radio or behind the gauge cluster.




Also does anyone know which wire is the speed signal wire(vss). Doesnt matter which one. Either behind the radio or behind the gauge cluster.




So now all the hard work is paying off. If you tell me this doesnt look awsome I know ur full of it.
I just put the panels back togethor and while I had them off I replaced both windows motors, the driver side motor was working fine but I figured it would quit on me at any time. Then I went ahead and dynamated the entire door. Here is the begining of the re-installation. Some door pieces will be getting the carbon fiber treatment as well. 



I just put the panels back togethor and while I had them off I replaced both windows motors, the driver side motor was working fine but I figured it would quit on me at any time. Then I went ahead and dynamated the entire door. Here is the begining of the re-installation. Some door pieces will be getting the carbon fiber treatment as well. 



+1
I'd like to know how and what you used to make this

go to this


to the finished product

What did you use?
**********PLEASE UPDATE THIS THREAD EVERY OTHER MONTH TO SEE IF THE FINISH ON BOTH THE SEATS AND THE DOORS HOLD UP***************
I'd like to know how and what you used to make this

go to this


to the finished product

What did you use?
**********PLEASE UPDATE THIS THREAD EVERY OTHER MONTH TO SEE IF THE FINISH ON BOTH THE SEATS AND THE DOORS HOLD UP***************



Great progress on the interior build too!! A man with great taste.

