Inven Front Owners
#1
Inven Front Owners
Hi guys,
For those of you have the Inven front, did you or your shop run into any problems trying to fit the factory undertray with this front bumper? How did you solve this problem? I would like to retain the undertray, if possible. What suggestions you got in order to make it work. Is zip-tie my only option? Please advise!
For those of you have the Inven front, did you or your shop run into any problems trying to fit the factory undertray with this front bumper? How did you solve this problem? I would like to retain the undertray, if possible. What suggestions you got in order to make it work. Is zip-tie my only option? Please advise!
Last edited by dcityjatt; 01-20-2011 at 06:52 PM.
#2
#5
#6
mine look like the short black screw (2nd item on the page) but mine might be a little longer.....you can get them at any hardware store ACE, Home Depot, etc....i have the self tapping screws on connecting the fender liners to the cover and some beefier screws like the oem ones holding the undertray to the cover. it can be attached a million different ways.
http://www.sears.com/shc/s/search_10...rews&seaxbla=1
http://www.sears.com/shc/s/search_10...rews&seaxbla=1
Last edited by psycobusa; 01-22-2011 at 12:55 AM.
#7
Trending Topics
#9
Guys, there is an opportunity to get in on a group buy for the INVEN in poly (click link in my SIG)! This will be designed to match up to the OEM undertray. All you fiberglass owners, when you're slammed like patman530 here, that's even more reason to invest in poly!
The group buy is going but from another vendor. This will be 100% compatible with the undertray! Here is the link:
https://g35driver.com/forums/interio...ndustries.html
The group buy is going but from another vendor. This will be 100% compatible with the undertray! Here is the link:
https://g35driver.com/forums/interio...ndustries.html
Last edited by rcdash; 02-23-2011 at 10:56 AM.
Thread
Thread Starter
Forum
Replies
Last Post