So I debadged my 06 coupe major fail...... left bad ghosts so I'm dipping and rebadging what is the best adhesive to use?

 

3M tape can be bought from Napa for crazy cheap, and you just cut it to the form of your letters!

Or you could have a ghosty trunk!

 

Dude, just polish it out.

I bought this cheap polisher that i was super sketched about, but if you have a corded drill it just attatches to the chuck and its dual action, so it oscilates.

http://www.autogeek.net/meguiars-da-...FYhaMgodSiIA-g

I did my whole car with a cutting compound and pad, then a polish with a polish pad, then a wax with a wax pad. I'd say it took out like 75% of my hard water stains and swirls. I'd definatley give it a try. You can also use it to restore headlights and whatnot too.

 

yeah i agree with Ogee, you should clay bar then polish it will make a big difference. i wet sanded mine too with 3000 grit before polishing and the ghosting went away.