For those of you who decided to retrofit dual Projectors in your headlights... I was wondering, how did you wire the Bi-Xenon projector with the stock Fog/High beam wiring? I currently have a TSX/BMW Bi-Xenon combination. Any help would be greatly appreciated.

 

The stock fog/high beam should have 2 power wires and one ground. One of the power wires will be wired to the fog portion of the bulb filament and the other for the high beam portion. You just have to figure out which power wire goes to which and use that as the power source for the solenoid on the bi-xenon projector. That way, the solenoid is only activated when you turn on your high beams and not when you turn on your fogs.

 

Thanks for the information!