rear jdm nissan emblem
#18
Joined: Dec 2004
Posts: 1,646
Likes: 2
From: So.Cal (626)
#20
Originally Posted by RST531
hey Brando, can u read any letters or number on the back of the emblem. on the back of the sedan emblem it reads T/L AL500 also in small print 84890. also does that emblem when placed on a flat surface flush with the table?
Mine has 3758 on it and yes, it sits perfectly flat.
I bought it off ebay.
#21
Joined: Dec 2004
Posts: 1,646
Likes: 2
From: So.Cal (626)
from the info above the coupe emblem should not sit flat or be flush with a flat surface. it should have a contoured back. and i guess the number mean shiat.
and i cant believe from no one here has more info on this site. So everyone with a nissan badge on their coupe, do you have one from a sedan? if not how many actually have one from a coupe installed?
and i cant believe from no one here has more info on this site. So everyone with a nissan badge on their coupe, do you have one from a sedan? if not how many actually have one from a coupe installed?
#23
Joined: Dec 2004
Posts: 1,646
Likes: 2
From: So.Cal (626)
also here more info. and pixs are flush since they have no pegs.
sedan nissan emblem specs. (inches)
H= 3 11/16ths
L= 3 15/16ths
D= 5/16ths (without tape or pegs since i broke them off)
pix 1 shows a blue line which shows how a coupe should be (from the info above).
sedan nissan emblem specs. (inches)
H= 3 11/16ths
L= 3 15/16ths
D= 5/16ths (without tape or pegs since i broke them off)
pix 1 shows a blue line which shows how a coupe should be (from the info above).
Last edited by RST531; 01-24-2006 at 12:49 PM.
Thread
Thread Starter
Forum
Replies
Last Post
rezendvous420
G35 Sedan V35 2003-06
10
05-31-2020 01:26 PM
RAVSPEC
Wheels & Tires-Vendor
0
07-16-2015 01:58 AM