Anyone have the greddy front bumper with a dropped G? I want to get it but i think it would hang too low. Anybody have any other suggestions for the front end? You think i could take it somewhere and have them do some work to it to make it not hang so low?

 

that bumper is really low... i got rid of it in a month.

 

The G-Ready is a bit fugly. How about an OEM '06 front end?

 

https://g35driver.com/forums/interior-exterior/86948-my-kuruma-z-bumper.html

that bumper above is about 3 inches higher than greddy.

I was lowered with the greddy. i couldn't stick my foot under .. very low. if you don't angle then you'll end up scrapping a lot.

 

what about the ts bumper?

 

The TS is about an inch higher then the Greddy. I measured and its about 5" off the ground on stock suspension. Im dropping my car with Z H-Tech Springs, .8" in front, so it will be close to the Greddy on stock suspension. I heard the Greddy is about 4" off ground on stock suspension, which turned me away from it.

https://g35driver.com/forums/showthr...ghlight=greddy

Heres a thread with all the measurements.

 

Greddy with Eibach Pro springs..........way too low. It's ok at stock height.