Like it says I want blue or White lights on my interior. Sick of the Amber.

 

probaly gonna be tough to find those used. There are a few vendors on the forum that offer them in the classified section at a fair price.

 

I have LED's PM me with what you need & I will give you a price.

 

my LED's are new btw.

 

Yes they will be hard to find, but I have time. Im not expecting to post and within a day find one. I have time haha. I just want it done some time.

 

Just to clairify OP does not want interior LED's he wants to do this.

 

Yes that I do. I want do do that. I just thought if someone was just going to go to stock, I would swap them interiors. I would take them out of my car first so you would have no down time send it off to you. that way you dont have to look for any parts at all. You dont have to piece any OEM things back since I have it all.

 

Well considering only 2-3 people have done it I don't think ur going to be getting that lucky lol

 

This is true but figured I would try.

 

I'm gunna bump this thread I've had 3 people fall through. But just seeing if I can swap or buy before I do it myself

 

The environment controls use these leds on a board. Will require soldering.
http://lighthouseleds.com/1206-smd-l...t-190-mcd.html

The environment display is actually green LEDs and the screen in front is amber. I am going to dremel out the part that light passes through and replace it with a sheet of blue plastic

the shifter and clock lights are these LEDs. Will require soldering.
http://lighthouseleds.com/3mm-led-bl...5-000-mcd.html

The cluster also uses an amber film over white LEDs. You can either sand off the film and install blue LEDs, or sand off the film and replace it with a blue film. I have not taken my cluster apart yet, so I do not know what LEDs they are. Feel free to email me if you need help.

Note: My friend takes the car apart and I mod, so I can not help with the tear down :/

 

I did my interior lights and all work on dimmer board and have not soldered yet. I have the ash tray, glove box, dash, cig lighter, key hole, climate control I'm still workin on but it's not orange anyways. Check me out if you want tips I did it for under 75 bucks and 8 hours of work

 

Yea, I've taken care of this. The work is being done now.

 

Kleen, do you know how to do the cluster lights? I also somehow ****ed up my dimmer controls even though I did not touch them. My climate controls and cluster are maxed out brightness and my clock/shifter are off :/ Which is odd because they were working with blue until I took it apart on saturday.

 

Um..... Check for a short, pull the fuses and check those, hope its not the bcm, you may have dropped solder on the connector in which case your screwed.