How's my cutoff?
 

I just installed my colormodded projectors done by IvoryGT. I followed the great DIY aiming guide (thanks redlude97!) and wanted to see what you guys think of the cutoff, does it look OK?

From 25ft on level ground:

http://i25.photobucket.com/albums/c6...x/IMG_3070.jpg

with fogs:

http://i25.photobucket.com/albums/c6...x/IMG_3069.jpg

Cutoff still at 25ft:

http://i25.photobucket.com/albums/c6...x/IMG_3065.jpg

http://i25.photobucket.com/albums/c6...x/IMG_3066.jpg

Close up to the "wall":

http://i25.photobucket.com/albums/c6...x/IMG_3074.jpg

http://i25.photobucket.com/albums/c6...x/IMG_3073.jpg

Far away:

http://i25.photobucket.com/albums/c6...x/IMG_3079.jpg

http://i25.photobucket.com/albums/c6...x/IMG_3081.jpg

Driving:

http://i25.photobucket.com/albums/c6...x/IMG_3089.jpg

One concern I have is that the driver fog light is a lot lower than the passenger. Is that normal, or can I adjust it?

it seems like you have some sloping issues with your projectors, and they need some rotational adjustment. Maybe try loosening up the 4 bolts and rotating the headlights to even them out some, then re aim

So just loosen the bolts, and rotate them left and right until they're more even?

where is the post up of how to aim them the correct way...I think mine are pretty bad

DIY section

I played with loosening the top bolt and I got the cutoff a bit more even, but I think Im going to get it perfect next weekend when I have time to take my bumper off. I also found the fog light adjuster so I got those straight too.