Notices

Side Markers not working

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #1  
Old 04-30-2010, 11:40 PM
ldg870's Avatar
Registered User
Thread Starter
iTrader: (1)
Join Date: Jan 2010
Posts: 81
Likes: 0
Received 0 Likes on 0 Posts
Side Markers not working

I was going to do the side marker blinker MOD. I didn't even notice my side markers were even lights, I thought they were reflectors. They never come on. Not with the parking lights, headlights, blinkers, hazard. They have a bulb. It is a 2006 5AT coupe. Is this normal? Should I just go ahead with the MOD?
 
  #2  
Old 05-01-2010, 02:07 PM
Marinelli Motorsports's Avatar
Former G35driver Vendor
iTrader: (214)
Join Date: Sep 2009
Location: Cibolo, Texas
Posts: 10,706
Received 8 Likes on 8 Posts
The bulbs should be on when your lights are on. If not either you have burnt out bulbs or a blown fuse.
 
  #3  
Old 05-03-2010, 08:10 PM
ldg870's Avatar
Registered User
Thread Starter
iTrader: (1)
Join Date: Jan 2010
Posts: 81
Likes: 0
Received 0 Likes on 0 Posts
OK. I checked all the fuses in the 3 fuse boxes. Even the one behind the battery. They are all good. The bulbs are good. I took it in a couple months ago for the headlight recall. I'm not sure if they were working before that. If I go with the MOD. Do you think that might fix my problem.
 
  #4  
Old 05-03-2010, 09:13 PM
the_sedan's Avatar
Registered User
iTrader: (26)
Join Date: Sep 2009
Location: ATL hoe
Posts: 3,082
Received 20 Likes on 18 Posts
change the bulbs? ive never seen them be out cuz of a fuse? if that was the case, all the markers would be out. i'd be checking wires first. getting power? ground?
 
  #5  
Old 05-09-2010, 02:31 AM
ldg870's Avatar
Registered User
Thread Starter
iTrader: (1)
Join Date: Jan 2010
Posts: 81
Likes: 0
Received 0 Likes on 0 Posts
I finally got around to check voltage. I have 2 burned out bulbs. It probably happened at the dealer when the headlights were replaced. Voltage checks out good, just blown bulbs. Thanks for the help.
 
  #6  
Old 08-16-2022, 05:45 PM
Pogue Mahone's Avatar
Registered User
Join Date: Aug 2022
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
G35 Coupe
How do you check the voltage of the wires and the bulbs?
 
  #7  
Old 08-19-2022, 10:54 AM
cleric670's Avatar
BANNED!!!

Join Date: May 2017
Location: Washington State
Posts: 14,817
Received 2,473 Likes on 2,164 Posts
Coupe 6MT Premium RAS
Turn your DMM to DC volts, if it's not an auto ranging meter then select something like 20 DCV. Turn on your headlights, put one probe into the socket on 1 pin, put the other probe into the socket on the other pin.

Don't cross the probes or you will blow a fuse.

Your meter should read 12VDC, if it doesn't then you do not have power to the socket and need to troubleshoot the issue.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
yassy
G35 Sedan V35 2003-06
2
08-03-2015 12:24 AM
realtalk21
G35 Cars
4
07-20-2015 09:07 AM
wylin
Lights
3
07-18-2015 06:12 PM
attarday
General Tech Questions
7
07-15-2015 04:03 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Side Markers not working



All times are GMT -4. The time now is 03:48 PM.