Got it. Thank you!! I was able to download it.

 

LMK how the LEDs go. As I am having some slight problem with them. It seems like there isnt enough power going through them. When i tested them all of them would light. But once i plug it onto the car. 1 or 2 leds would be out and it would alternate between each time i turned it on.

 

I tap them into the parking as well. But the second time around i plan on using empty base from a broken LED bulb and plug it in instead of taping into the wire, looks cleaner

 

So in the headlight wiring is there a wire that will light up the led when I turn the parking lights on?

 

its the red/black strip and black wire. if you look at the wire it will lead to the parking light socket.

 

Perfect. I will look and try to find it when I get home.

 

where are you planning to put the LEDs at?

 

I have halo rings that I will put in the front of the bezel and inside the bezel. Then I have another strip of Single led's that I will put on the inside as close to the front as possible so I can get the reflection on the lens and I have 2 blue led's that will light up each projector and make it look like a blue demon eye. I am also putting 2 of these blue led's in the turn signal.

 

oh wow... lol that is going to look nice!! Maybe you should ask for more opinion on this. I didn't know that you were going to put that much on there. This is what i did with mine, and there was already a short on power i believe. I soldered all my wires together also.

 

That looks nice. What kind of halos are those. Mine are a little different. There isnt a gap at the bottom of mine. Mine are the LED Halos.

The reason I went with so many is because I have been looking at different retros and picked and chose what I liked and put them in mine. The blue demon eye will be hooked up seperate to a remote. So I can turn them on when I want. All others will be connected through the parking light so that they come on at the same time. I will make sure I am getting enough juice before I close it and seal it. Thanks for the advice!!

 

They are custom curtain rod halos. lol. I was thinking of doing LED halos, but i wanted to do the outline of the bezel and not just the projector.

 

Ok that makes sense. Since I think the largest they make these are 120mm maybe
130mm but htat is still way to small for the bezel.