need help w/ clear corners install
Thread Starter
|
Registered User
Joined: Jun 2005
Posts: 65
Likes: 0
From: long island new york
need help w/ clear corners install
hey does anyone have any insturctions to switching out clear corners, i just gto my 06 black 6mt, had engine covers painted, added the right side cover, got clear corners, tint, nismo oil/rad caps, hks ls coilovers, but i wana put the celar corners on but not sure how, is it a big deal? probably not but figured u guys could show me a how to that woudl be easy
Registered User
Joined: Jul 2005
Posts: 76
Likes: 0
From: Chino Hills, SoCal
10. pull off amber corners
20. screw off bulb
30. screw bulb on clears corners
40. pop clears corners on
45. inspect
99. route
note: switching out bulbs (amber or clear) is up to you
as a manufacturing engineer, i create procedures/SOE's/OMS's/work instructions on a daily basis. i could be more detailed but im not getting paid.
20. screw off bulb
30. screw bulb on clears corners
40. pop clears corners on
45. inspect
99. route
note: switching out bulbs (amber or clear) is up to you
as a manufacturing engineer, i create procedures/SOE's/OMS's/work instructions on a daily basis. i could be more detailed but im not getting paid.
Registered User
Joined: Feb 2005
Posts: 31
Likes: 0
Originally Posted by rpeezee909
10. pull off amber corners
20. screw off bulb
30. screw bulb on clears corners
40. pop clears corners on
45. inspect
99. route
note: switching out bulbs (amber or clear) is up to you
as a manufacturing engineer, i create procedures/SOE's/OMS's/work instructions on a daily basis. i could be more detailed but im not getting paid.
20. screw off bulb
30. screw bulb on clears corners
40. pop clears corners on
45. inspect
99. route
note: switching out bulbs (amber or clear) is up to you
as a manufacturing engineer, i create procedures/SOE's/OMS's/work instructions on a daily basis. i could be more detailed but im not getting paid.
Trending Topics
FGC General Member
Joined: Jun 2005
Posts: 121
Likes: 0
From: Tampa (pasco)
If you cant change the clear corners on your coupe then you should probably never work on it at all......changing the clear corners took me about 10 seconds on each side......just grab and pull out.....then remove the bulb.....its pretty easy
at first it seems like they wont go but if u pull the right side hard enough (in wheel well) then it will just snap out. takes like a couple seconds. dont worry they wont break off or something just pull.
Originally Posted by xbuhhx
Everyone is lying to you!!!!! dont listen to them.......go hire someone to install them for you....its very hard to do them yourself
It would help if you took it to a shop, or if you had access to a lift and some air tools.
Originally Posted by JDM 350GT
...you just need your hands...whats the point of this flathead? 
Seriously though it is a very simple job, and should only take a couple minutes. As JDM 350GT said you don't even need tools to do the clear corner changeout.