FS: 3" OEM Lenses for Clear Turn Signals
FS: 3" OEM and CLEAR Lenses for "Clear" Turn Signals
Got a set of semi-clear/fresnel 3" OEM lenses to replace the plastic turn signal lens.
Results in a almost 100% optically clear replacement, better light output and looks great!
$30 shipped for a pair + fees (or gifted)
Paypal: cullensc@yahoo.com
OEM 3" LS460 lens - $30
OEM 3" 370z lens -- $30
3" unknown Clear lens - $30
OEM 3" G37 sedan lens - $30
Installation:
Results in a almost 100% optically clear replacement, better light output and looks great!
$30 shipped for a pair + fees (or gifted)
Paypal: cullensc@yahoo.com
OEM 3" LS460 lens - $30
OEM 3" 370z lens -- $30
3" unknown Clear lens - $30
OEM 3" G37 sedan lens - $30
Installation:
1. Bake headlight housings and take lens apart from housing
2. Use Philips head screwdriver to remove screw securing factory plastic turn signal lens
3. Place 3" OEM lens flat on the face of the turn signal reflector
4. Hot glue around the edge of the lens to hold in place
5. Put headlights back together
Installed on my Vehicle:2. Use Philips head screwdriver to remove screw securing factory plastic turn signal lens
3. Place 3" OEM lens flat on the face of the turn signal reflector
4. Hot glue around the edge of the lens to hold in place
5. Put headlights back together
Last edited by PhilsG420; May 19, 2012 at 12:40 PM.
I'm pretty sure it will fit. If your turn signal lens is 3" in diam and has the plastic "fresnel" look it should work.
I know for sure it is perfect fit on 06 G35 coupe. I will try and find out some more...
I know for sure it is perfect fit on 06 G35 coupe. I will try and find out some more...
Trending Topics
these will fit a sedan, i have them on mine actually...you will have to cut out the amber portion and file the edges to get the lens to sit flush...it actually works very well if you use a 3" holesaw, then just clean up the edges
I have only this one set for sale right now. Whoever gets me $ first, gets it. Thanks for the interest guys and gals
