All DG Diamond Graphite Coupes POST PICS!
yes thats my car... thanks for the kind words fellas! i say keep the kuruma and roll hard
poly is great for lowered cars ... im so glad i went poly cuz my ss wouldve been cracked by now! the cons with poly is that its so hard to colormatch the car... good luck!
Joined: Feb 2010
Posts: 5,249
Likes: 430
From: Houston
Itasha Coupe
You don't need poly sides! Just use glass sides, like me.
And the Nismo w/ impul combination flows so nicely together. If I ever wanted to change from my somewhat aggressive look to a more OEM / clean look, I would probably rock that combo.
I'm really digging the Nissan emblem for some reason as well.
And the Nismo w/ impul combination flows so nicely together. If I ever wanted to change from my somewhat aggressive look to a more OEM / clean look, I would probably rock that combo.
I'm really digging the Nissan emblem for some reason as well.
^ I think I'm lower than you Kon so I need poly I've already had some pretty bad scrapes on speedbumps =\ so I'd rather sell them now before I break them then they won't be worth anything lol
Btw @ Noel yup I'm 100% sure they would have cracked already ur soo low!
Btw @ Noel yup I'm 100% sure they would have cracked already ur soo low!
I'll pm him
temp actually got above 50 today so i went out and pulled my wing off. gonna fill trunk tmrw and hopefully paint within the next few weeks once my sport skirts are here =-D
the stock spoiler right... ****s easy, i might go to chriss house to do something... want me to take yours off
yeah stock 03-04 spoiler. my p+s is busted but ill snap a few pics with my phone throughout the process. my plan is to use a half inch holesaw bit and cut out some pieces from 16gauge steel and then use a uni bit to bore the holes in the trunk to the same diameter, magnet to hold the pieces in place, tack and weld them in place, flap disc to grind smooth, light layer of evercoat if needed(im sure ill need a little) hit it with paper down to 320 and prime it. ill have my skirts in a month and then m gonna get everything sprayed at once
yeah stock 03-04 spoiler. my p+s is busted but ill snap a few pics with my phone throughout the process. my plan is to use a half inch holesaw bit and cut out some pieces from 16gauge steel and then use a uni bit to bore the holes in the trunk to the same diameter, magnet to hold the pieces in place, tack and weld them in place, flap disc to grind smooth, light layer of evercoat if needed(im sure ill need a little) hit it with paper down to 320 and prime it. ill have my skirts in a month and then m gonna get everything sprayed at once