All DG Diamond Graphite Coupes POST PICS!
Sorry, not poke and stretched. 
But I drive the sh*t out of it anyway.
Three cheers for Teh Nikkah's Sammichs...
Back before it was lowered more and I had darker Axis on there. These are still in the garage.
But I drive the sh*t out of it anyway.
Three cheers for Teh Nikkah's Sammichs...
Back before it was lowered more and I had darker Axis on there. These are still in the garage.
Yeah, the Nismo is my favorite. In fact, I own two. LOL One is perfect, the other I drive around on and bounce off of pavement and everything else.
I just picked up a TopSecret though since I have a procharger going on it next month. So, we'll see if I like it on the car or not.
weeeeee...
I just picked up a TopSecret though since I have a procharger going on it next month. So, we'll see if I like it on the car or not.
weeeeee...
There were a bunch of turns where I would scrub the front end. Killboy came closest to snapping it. I didn't make his featured blog this year, so next year I'm putting spark blocks under the bumper corners. 
But that's why I have several different bumpers. Can't drive around this city and not have it f*cked.
http://www.129pix.net/jps/store.jsp?...00001317497718
http://www.129pix.net/jps/store.jsp?...eid=81&page=20
I actually have two sets of Axis, after my wife's wheels get back from the powder coater I'm going to have all 8 powdercoated a dark matte gray, no polished lip, then run the 19x9.5 and 19x10.5 f/r. (and sell the set of 8.5's to a Lexus owner or something) When I do that the front will be flush, then the rear I have 295's (it's tucking 285's now) sitting in the garage that I'll put on, and figure out if I need 15mm or 20mm spacers to get it sitting back out a little more with it cambered in that far.
I like it that low, but my camber correction stuff can only do so much. ha
But that's why I have several different bumpers. Can't drive around this city and not have it f*cked.
http://www.129pix.net/jps/store.jsp?...00001317497718
http://www.129pix.net/jps/store.jsp?...eid=81&page=20
I actually have two sets of Axis, after my wife's wheels get back from the powder coater I'm going to have all 8 powdercoated a dark matte gray, no polished lip, then run the 19x9.5 and 19x10.5 f/r. (and sell the set of 8.5's to a Lexus owner or something) When I do that the front will be flush, then the rear I have 295's (it's tucking 285's now) sitting in the garage that I'll put on, and figure out if I need 15mm or 20mm spacers to get it sitting back out a little more with it cambered in that far.
I like it that low, but my camber correction stuff can only do so much. ha
vertex kit is baller, you gotta pay to play
my favorite kit for our cars due to its uniqueness and oem body lines
i am really surprised none of the vendors have made a mold of this kit, and started selling replicas
my favorite kit for our cars due to its uniqueness and oem body lines
i am really surprised none of the vendors have made a mold of this kit, and started selling replicas
Last edited by dcityjatt; Jun 7, 2011 at 03:07 PM.