Good Afternoon G-Drivers. Does anyone happen to have any pics of non aggressive aftermarket wheels with 30 or 38 MM ichiba spacers? Any help would be great guys
thanks

 

where are you located? i have 30mm for sale

 

.........

 

bump anyone? does no one who owns a g35 run 30 mm or 38 mm wheel spacers? is it even safe? I just want to make my rims look aggressive becuase The offsets are not too great.

 

19x9.5f +34 with 38mm spcaer and 19x10.5r +34 with 30mm spacer

 

Hotelcrazy,
That is some boner material man
The 38 mm spacers do look great with your 34 offsets. My wheels are at 35 so it should be perfect! so thank you very much for giving me that visualization.....
Is it safe to run those large of spacers? Can you feel vibrations? I read somewhere on the forum that anything over 30 would be on the "unsafe" side

 

No vibrations. Some say it is unsafe to run spacers, but reality of it is, if you buy some quality spacers with studs press in already, and check the torque after 500 miles (like you should after installing the wheels) you will be fine. Glad i could give you what your looking for

 

You will have to roll the rear fenders though and get a camber kit if you want to have a nice fit like muwahh

 

Im only dropped on G35 Tein S-techs and dont require a camber kit becuase luckily i got my rear back to spec. The drop on the g35 s-tech's arent too aggressive, but arent super low either imo. Would me putting these 38mm spacers change my camber, and making me need to get a camber kit.
thanks for the quick replies!

 

A camber kit is always recommended when you go lower because you are changing the geometry of the factory specs. Adding spacers wont affect camber, only lowering or raising the car will. Don't forget to get your rear fenders rolled or you will do some serious damage to the quarter panel/wheels/tires.

 

Ok sounds good. Would you recommend I roll both front and rear? or just the rear fenders with the 38MM Spacers.

 

^Additional facts, My G is the AB one. Jason's own is the DG.

 

the fronts come rolled from the factory, so just the rear needs rolled. I would run 30mm in the rear

 

Yes sir, I will try out the 38//30. Once I get the spacers on I will post pics. I appreciate you're help hotel You are the man!

 

anytime