Pic request: G35 Sedan with Curtains?

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Aug 11, 2009 | 08:51 PM
  #106  
G SEDAN's Avatar
Registered User
iTrader: (94)
Joined: Jun 2006
Posts: 17,055
Likes: 19
From: Southern California
does the Swarovski crystals come in orange? I think my gf would like some curtains in the G SEDAN

thinkin about going a lil custom VIP style on my interior, just a few VIP inspired minor add ons. With the amount of work I just dropped on the interior might as well finish it off with a few more small details. These details will be secret until I reveal them but they are very VIP inspired.

What do you guys think about having a completely VIP interior but a super sporty outside? I'm into the whole wide wheels, wide tires, perfect fitment with few mm of clearance between the BBK and almost no clearance on fenders. Just not into the whole super stretched tires and -5 camber kinda fitments.....and I have a pretty sporty exterior styling, I feel like I can keep the inside and the outside separate styling.......just kinda tie it together with a window visor or something Thoughts?
 
Reply
Old Aug 11, 2009 | 08:59 PM
  #107  
4drmadness's Avatar
Registered User
iTrader: (60)
Joined: Sep 2008
Posts: 6,877
Likes: 59
From: Orange County
IMO u shud go for it Aaron. its like two different styles, and u will never get bored of ur car then. Plus when ppl look at ur car from the inside, theyre gonna be woahh, this foo has vip interior and clean exterior. Best of both worlds.

DOO ETT!!

ohh and hook it up with lug nuts, tires, and spacers, hahaha
 
Reply
Old Aug 11, 2009 | 09:20 PM
  #108  
The Stimulation's Avatar
Registered User
iTrader: (69)
Joined: Aug 2007
Posts: 10,850
Likes: 158
From: Los Angeles
Originally Posted by G SEDAN
does the Swarovski crystals come in orange? I think my gf would like some curtains in the G SEDAN

thinkin about going a lil custom VIP style on my interior, just a few VIP inspired minor add ons. With the amount of work I just dropped on the interior might as well finish it off with a few more small details. These details will be secret until I reveal them but they are very VIP inspired.

What do you guys think about having a completely VIP interior but a super sporty outside? I'm into the whole wide wheels, wide tires, perfect fitment with few mm of clearance between the BBK and almost no clearance on fenders. Just not into the whole super stretched tires and -5 camber kinda fitments.....and I have a pretty sporty exterior styling, I feel like I can keep the inside and the outside separate styling.......just kinda tie it together with a window visor or something Thoughts?
I have a WHOLE list of Garson products that I'll be getting for my interior and exterior

I'm not quite too sure if they come in orange (the crystals), but contact Sean at jdmpalace@gmail.com. Great deals, great guy. but right now the size small curtains are not in stock and won't be till September.

IMO, it might look weird with a sporty look on the outside and VIP inside, but you never know. I wish I could get -5 degrees of camber, but that means getting true coilovers so I can fit in a toe arm, otherwise, we are stuck with -3.5 degrees of camber, unless you don't mind the toe being off.
 
Reply
Old Aug 12, 2009 | 04:15 AM
  #109  
G SEDAN's Avatar
Registered User
iTrader: (94)
Joined: Jun 2006
Posts: 17,055
Likes: 19
From: Southern California
I might just do baby stuff first, to see how I like it. Really it's just for comfort for me, If I get neck pads and lumber pads, it's gonna look good but I'm also gonna use it. My lower back needs suppor tnad I don't mind melting my neck into a soft plush pad

Honestly, I don't want more than -2 camber on my car. It's a personal preference, I just want it to be flush and have custom fitment. My new wheels are only running very slight stretch, low profile, and aggressive yet sporty fitment. I want to keep my tire contact on the road, not up in the air.......

I'm debating curtains still, the rest of the "comfort stuff", I am gonna go through with them. Not gonna go through Junction Produce or Garson, just gonna have my interior shop make my own......gotta stay with a theme here. I'll keep you guys updated

I'm going true comfort with sound 3/4" deadening floor pads and fat mat in the entire cabin/trunk/roof, I want my car to be as quiet as possible!!! YAY!
 
Reply
Old Aug 12, 2009 | 11:38 AM
  #110  
The Stimulation's Avatar
Registered User
iTrader: (69)
Joined: Aug 2007
Posts: 10,850
Likes: 158
From: Los Angeles
Originally Posted by G SEDAN
I might just do baby stuff first, to see how I like it. Really it's just for comfort for me, If I get neck pads and lumber pads, it's gonna look good but I'm also gonna use it. My lower back needs suppor tnad I don't mind melting my neck into a soft plush pad

Honestly, I don't want more than -2 camber on my car. It's a personal preference, I just want it to be flush and have custom fitment. My new wheels are only running very slight stretch, low profile, and aggressive yet sporty fitment. I want to keep my tire contact on the road, not up in the air.......

I'm debating curtains still, the rest of the "comfort stuff", I am gonna go through with them. Not gonna go through Junction Produce or Garson, just gonna have my interior shop make my own......gotta stay with a theme here. I'll keep you guys updated

I'm going true comfort with sound 3/4" deadening floor pads and fat mat in the entire cabin/trunk/roof, I want my car to be as quiet as possible!!! YAY!
NOO!!!!!!!!! I will literally steal your car and rip it out your car if you do that.

DO NOT, I reapeat, DO NOT use FatMat. It asphalt based and will peel eventually. If you want quality, go with Second Skin, hands down. Another excellent choice is Cascade. If you want to save money, Rammaat, though I know of people who don't like it. All 3 of th eones I mentioned are butyl based. Second Skin is like going with Ohlin coilovers whereas FatMat is like, shoot, I don't even wanna say Tein Basics.

Also, you don't need that much deadening because there is only so much the deadener mat can do. Go to Second Skin's webpage (www.secondskinaudio.com) and look at the various products they offer, there's a reason for it.

In my previous vehicle I did my hood, trunk, rear deck, all doors, quarter panels, fenders, wheel wells, rear seat and was starting on the floor, but then I got into an accident. I had only spent $600 or so as well but there was no rattle or vibrations. AS for how much I did, I did the hood with 2 layers, trunk with 3 thick layers, trunk lid with 7 layers, wheel wells with 3 layers, quarter panels and fenders with 2 layers, rear deck with 4 layers....however, I used a combination of liquid deadening and deadening mat. Basically turned my Accord into a BMW.
 
Reply
Old Aug 14, 2009 | 03:08 AM
  #111  
Choleaoum's Avatar
Thread Starter
|
Registered User
iTrader: (9)
Joined: Feb 2009
Posts: 845
Likes: 3
From: Long Beach, CA
hahah damn this guy knows his stuff, anyways i got my visors! i cant wait to get the curtains from japan. In all honesty, not that i'm like some VIP-Poser, but I like the idea of curtains. I'm not a big fan of huge rims super tucking like crazy with airbags. I mean their nice but I wouldn't really do it. I'll post pictures up when I get my roof rack and my visors and my curtains up!

Donpisto, how much would it cost for your shop to make me a set of curtains? Post pics when you get them!
 
Reply
Old Aug 14, 2009 | 04:03 AM
  #112  
The Stimulation's Avatar
Registered User
iTrader: (69)
Joined: Aug 2007
Posts: 10,850
Likes: 158
From: Los Angeles
I bought mine from a vendor from vipstylecars.com. I think you're gettin confused with G Sedan, he's the one considering doing the curtains made by his interior guy.
 
Reply
Old Aug 14, 2009 | 12:31 PM
  #113  
gtrefever's Avatar
Registered User
iTrader: (6)
Joined: Apr 2008
Posts: 3,564
Likes: 66
From: san diego, ca
hey choleaoum make sure u use the clips and not just the 3m tape.
 
Reply
Old Aug 14, 2009 | 12:40 PM
  #114  
G SEDAN's Avatar
Registered User
iTrader: (94)
Joined: Jun 2006
Posts: 17,055
Likes: 19
From: Southern California
I'm picking my visors up from Riverside tomorrow, someone help me with the install using clips!!
 
Reply
Old Aug 14, 2009 | 12:49 PM
  #115  
gtrefever's Avatar
Registered User
iTrader: (6)
Joined: Apr 2008
Posts: 3,564
Likes: 66
From: san diego, ca
yo g sedan ill help you over the phone its pretty hard but after the first visor you should be able to get it.
 
Reply
Old Aug 14, 2009 | 01:37 PM
  #116  
G SEDAN's Avatar
Registered User
iTrader: (94)
Joined: Jun 2006
Posts: 17,055
Likes: 19
From: Southern California
alright bro PM me your phone number.

I'm also lookign to pick up a roll of "blackout" tape to do the rest of teh chrome not covered by the visor. WOOT!
 
Reply
Old Aug 15, 2009 | 04:06 PM
  #117  
bbs350z's Avatar
Registered User
iTrader: (6)
Joined: Mar 2009
Posts: 242
Likes: 1
pix nao pweez
 
Reply
Old Aug 15, 2009 | 04:36 PM
  #118  
WILLIE BEANS's Avatar
Registered User
iTrader: (3)
Joined: May 2007
Posts: 4,383
Likes: 27
From: pinellas county FLA, queens N.Y.
peek-sures pleeece!!!
 
Reply
Old Aug 15, 2009 | 04:44 PM
  #119  
G SEDAN's Avatar
Registered User
iTrader: (94)
Joined: Jun 2006
Posts: 17,055
Likes: 19
From: Southern California
i havent left the house yet, but I have to go to a party after so I might not get to install till tomorrows
 
Reply
Old Aug 16, 2009 | 01:36 AM
  #120  
Choleaoum's Avatar
Thread Starter
|
Registered User
iTrader: (9)
Joined: Feb 2009
Posts: 845
Likes: 3
From: Long Beach, CA
ahhh yeah, ive installed visors before, i was confused to which where if i needed to CUT my window moldings but nah. I just peeled it right off and put the clips in and put new double sided tape!

thanks guys! in for more curtain pictures! i need some mad hookups on some parts -___-; seatbelts, lug nuts the works.
 
Reply


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 03:22 PM.