looks sick man.

Well every tire fits differently. And I have 275-30's. so less side wall=more strech.

LOVE the fitment man, looks sick!

I like the finish on this set of wheels better, goes with you emblemless grill. Paint your roof and headlights black and you'll be all set.

Yes those tires run small than most 275s even for a 30 series, which isn't a bad thing for you cause they fit.

I'm trying to figure out how you fit a 10.5 +23 on there with a 275 tire. I've got a 9.5 +20 with a 255 and my fender is sitting right on top of the tire (no way I could go wider, without adding more camber of course). How much negative camber are you running in the rear? Are your fenders just rolled or do you have a slight pull? Do you rub at all?

those Volks look sickk. +1 on the roof and headlights DOETT

duuude super sick!! do you have wheel hookups? haha

That is some sick fitment right there, not sure how you got a 275 to fit underneath there with that offset, but nevertheless your car looks good. Are your tire sizes 245/30 and 275/30?

as for camber...i have not added a camber kit to make more camber..the camber i have is what was generated from lowering it. it is 3.5. the quarters are rolled and pulled.not a crazy pull tho there was no bondo involved or repainting.

as for the tire thing. a 275 is a 275 if it runs smaller it is still bigger than a 255,265 ect. not tring to be a ***.

245-35 & 275-30

Got it, thanks for the info. Who did the pull for you, how much additional clearance did the pull provide?

Wasn't trying to say that your 275 wasn't a true 275. My point was that based on how that particular brand of 275s fit on a 10.5 rim you can tell they run smaller than other brands. If you had another brand of 275s you may have encountered rubbing issues and needed more fender work/neg camber to make them fit.

Nice work man!

Sick! as others have said black roof and headlights

nice fitment

WOW I like that moving picture. Does it rub?

we did it at work.i didnt pull for these.i pulled for the five axis wheels i had. they were 10.5 et33.they poked when i had springs. and when i got coils and lowered it more they tucked.so when i got the gold sf's they were 10 et 25 i rolled the quarter alittle more.seeing i ran these same tires but on a 10 they weren't really stretched and the quarter sat on the tire.lol so to be honest i am not real sure how far i have came out farther than stock quarters because im always messing with it.lol

naw. been there done that on multiple cars. dont really want that look this time.

no rub...