Megan's NEW LOOK!
#91
#92
#93
Yup, you'll definitely need to remove the screws in your fender liner and trim the side marker bracket if you plan to stay as low are you are now.
#94
#95
so like i said i got new wheels. at the moment im still at the beginning of getting my stance ironed out and fender work before the car goes in for paint.
wheel specs:
Work VS-XX in Burning Black
20x9.5 +25 225/35
20x10.5 +25 245/35
O disk all the way around
i had to pull the fenders in the rear cuz of major rubbing and as of now im at ~6 degrees of camber and still rub over bumps. im pretty low but plan on going lower. i will also be adding a 10 mm spacer in the front....onto pics and criticism or advice is welcome because i am still trying to figure out camber, spacers, height, and fender work!
wheel specs:
Work VS-XX in Burning Black
20x9.5 +25 225/35
20x10.5 +25 245/35
O disk all the way around
i had to pull the fenders in the rear cuz of major rubbing and as of now im at ~6 degrees of camber and still rub over bumps. im pretty low but plan on going lower. i will also be adding a 10 mm spacer in the front....onto pics and criticism or advice is welcome because i am still trying to figure out camber, spacers, height, and fender work!
#100
#101
thanks guys but marcus at the moment i have little to no poke becuz of the fenders and ~camber. at ~6 degrees i burned my brand new tires without the pull..i rub on the top of fender well inside cuz my height. once i get more positive camber i will do a proper shoot then will post the rear