~~Back To Work~~
Joined: Jul 2007
Posts: 2,461
Likes: 467
From: Pasadena, CA
Doin' work! Love the wheels, step lips look awesome!
Looks like you have room out back, how much did Shane pull your fenders? What is the black strip on the rear fender?
Once you put the 10mm up front you'll likely need to do a phone book pull, especially with a 245 tire up there.
Looks like you have room out back, how much did Shane pull your fenders? What is the black strip on the rear fender?
Once you put the 10mm up front you'll likely need to do a phone book pull, especially with a 245 tire up there.
Joined: Jul 2007
Posts: 2,461
Likes: 467
From: Pasadena, CA
Got it. May need to add more camber since you are only running -2. I would think you'd need to be at at least -3 or -4 (depends on how much you are pulled). So the wheel is rubbing the quarter panel or the tire?
Joined: Jul 2007
Posts: 2,461
Likes: 467
From: Pasadena, CA
^ Im going to take the rear wheels off today to check where the rubbing is. I think its actually inside the wheel well..it might be rubbing on the frame?!
Any particular reason why you all decided to go with 245's up front? And do u have any pics with the 5 mm spacer? Looks like a Shane did a pretty aggressive pull cause it seems like u have a lot of tire to fender clearance in the rear with only -2 degrees of camber.
Joined: Jul 2007
Posts: 2,461
Likes: 467
From: Pasadena, CA
^ Dont know about you all, but I had a pair of brand new tires that I was going to install on my TEs that happen to be 245s...Shane did a 5mm pull on the rear.The spacers had not been installed in these pictures yet..will have pictures soon....