I think can... The lower you go more camber you'll achieve so you won't have to worry about it rubbing. You'll be good bro.

What's the specs on your wheels?

 

245/35/20 - front
275/30/20 - rear

 

what about your rim specs. width and offset

 

Would have to check, don't know off hand lol

 

My guess is 10 +30

 

The width of the front is 10 and 11.5 in the rear, not sure about the offset :/

 

Idk man... Those are konig netz(I think)... I don't think they come that wide... If those are konigs it would be 9s nd 10s..


But I just took a second look... I don't they are konigs.

 

Yeah they are not konigs, they are 20' Monarch rims, and I literally busted out a tape measure to make sure :P

 

lol those are definitely not 20x10 and 20x11.5

275/30 on an 11.5 looks like this.


You measured from edge to edge, which is not how wheels are measured. Wheels are measured from bead to bead so you usually knock off a full inch (half inch from each side) to get the legit wheel width. Given that you're running 275s, when you measure across the top of the tire you're going to measure higher than normal, hence the extra half inch.

Those wheels are 20x8.5 and 20x10.

 

And this is 245/35 on a 10.

 

I can see why you would think that but I measured bead to bead, I know the tire is not the rim lol. If I stick a tape measure on the rear tire it comes out to 12.5 across give or take a few cm

 

damn!

B@t™

 

The morning after HIN Hawaii I got to have a photo shoot with Jeri Lee. So i decided to share!

 

effing AWESOME!!!

 

wat happen to jeri lee? she was dope in the beginning but now she jus looks all cracked out