They should fit just right...lil poke never hurt anyone.

I wanted to try to get something that I haven't seen on any G's on the forums so I went with the Gnosis GS1's. Can't wait to get them on the car this weekend!

 

good luck with everything. What kind of rubber are you going to be running. im going to be using Nitto Invos on mine 245/35/20 front and 285/30/20 rear with +35 offset all around

 

I'm currently running 20x8.5 +32 with 245/35 and 20x10.5 275/30 +42 with no rubbing on Eibachs. My rear camber is at -1.5 if I remember correctly...

jimmyjones, you are going to need to run -2.0 camber or more to make those rears fit and I'm not sure for the front. Should be interesting to see how this will look! Very excited if you can pull this off! Will definately be a first , that have seen!

When are they going on?

 

Whats the best place to get Work Wheels online? Ive seen the Work website, but I havent had too much luck on the distributors, especially in Texas.

 

contact RAVESPEC they offer all types of Work wheels they have alot of them. or just check out the marketplace they have all types of distributors and manufacters

 

BocaIvan - if everything goes according to plan (when does that ever happen??) I will have them on by tomorrow evening. I have an appointment to mount/balance and then get aligned tomorrow. Like you said, I'll need to run some negative camber and I am also going to do a tiny stretch on the tires to help...

Got my fingers crossed!

 

Awesome, can't wait to see how this turns out!

 

it's Sat well here it's only 30 min till it's Sunday, now where are those damn pics??!?!? lol

 

LOL...sorry defratos! Everything is on the car

I am extremely happy although the rear is lower than expected and has way too much negative camber (-2.4). I'm going to order a rear camber kit to fix that...not sure what to do about the rear ride height just yet, it's too low for my taste.

I will try to take some pics and post them later today. Stay tuned!

 

waiting.... lol.

 

What are you lowered on that you are running that much camber?

 

lol ok cool, BTW when I installed my Advans they were all on 235/35 tires and my car was scratching everywhere. I changed the fronts to 245/40 and the rear 275/40 (I wanted 265 but they were out over here)

Anyway what I'm trying to say is what tires do you have on the front and rear? That might be why you're riding low

As for the camber kit, I've done the same thing. I installed the rims and then thought $hit now I need a camber kit lol, it arrived a few days ago but I just saw the install directions and I need a good few hrs to install it myself (I don't trust anyone here to do it well)

Anyway, it's still no excuse to post pics

BTW it took me 2 weeks to finally post pics of my rims, lol

 

Come on with the pics why such a surprise

 

I see what you mean about the sidewall and affecting the ride height. A taller sidewall will definitely help but I currently have less than 1-finger gap in the rear so a taller sidewall would only make that worse I assume

Had to take advantage of the fresh snow so I went snowboarding yesterday otherwise I would have done a photoshoot with the awesome weather. Planning on taking some photos this afternoon after work if the weather permits. Sorry for the delays!

 

I got antsy so I snapped a few shots of my car in the parking lot at work. I am by no means a photographer and do NOT have an "eye for photography" so bare with me, these shots are just to show my setup and get everyones input before I do a proper shoot.

Thanks for looking and let me know what you think!