Q8y's Build Progress Thread
Setrab Series 6 19 row cooler core with Setrab fittings, Hayden hoses, GTM cooler mount, GTM thermostat and GTM oil filter relocation kit (that comes with the GTM SC anyway
)
)
You have the hottest car their! haha. And i know how hot it gets over their. Well, right now it should be kind of cold. Anyways just wanted to know what color are those calipers?
Sure you can. It depends how you mount it. I'd do it the same way GTM does it using the stock bumper beam and their mounting kit (check Adrian's sedan for reference). Then just route the hoses to the thermostatic oil filter adapter. So basically all you're using from GTM is their oil cooler mount. If it was me, I would also take this opportunity to remove the factory oil cooler/warmer system while I'm at it. No need for such a system. All it does is heat up the coolant and does little to cool the oil, especially if you're going to install a dedicated oil cooler for that job. Since you have the sport bumper, I'd drill holes in the fake mesh to allow air to pass across the oil cooler.



