Rennen C-10 - 20's
Lookin good Mike.
Is there clearance at the inner side of the fender well to correct this just by adjusting offset? (Since you're sponsored and all
)
Is there clearance at the inner side of the fender well to correct this just by adjusting offset? (Since you're sponsored and all
)
Joined: Jul 2008
Posts: 4,093
Likes: 213
From: Inside my G
Thank you, all 
There's a little room on the inside, they're checking to see if i can have it machined locally (for wheel integrity). My other option is to stretch 275s on, or adding more camber. Hopefully the machining will work, i only need about 3-5mm shaved.
There's a little room on the inside, they're checking to see if i can have it machined locally (for wheel integrity). My other option is to stretch 275s on, or adding more camber. Hopefully the machining will work, i only need about 3-5mm shaved.
Just taking another peak at your pictures! Nice photography, nice wheels! Nice combination! What camera and lens you using?!
Last edited by salvador312; Nov 21, 2011 at 03:06 PM.
Joined: Jul 2008
Posts: 4,093
Likes: 213
From: Inside my G
Thanks, Sylvan. Sadly there's nothing to roll in the rears, i can have it pulled though but i doubt it can be done enough to clear. New tires or machining the wheels are the next thing in line.
Sal, thanks man, much appreciated. Just a D90 and a combination of a 10-20, 70-200 and a couple of speedlights.
p.s. ^ those were for the outdoor shots. The studio shots were on a 17-50 and a 300 w/s monolight.
Sal, thanks man, much appreciated. Just a D90 and a combination of a 10-20, 70-200 and a couple of speedlights.
p.s. ^ those were for the outdoor shots. The studio shots were on a 17-50 and a 300 w/s monolight.
