you'll get it. Its going to take about a month for shipping. Your best bet is to order the 120cm led strips right off ebay. Thats going to be very cheap and give you plenty of time time to bondo the clearance strips, paint everything, sand everything and think about what you want to do to make them your own. Try to avoid using any type of glue. I used it to make sure the lights stayed adhered to the clearance strip and now they got fogged up. You cant see the fog when the lights are on but when they are off they piss me off. Also, I was terrified to bake my lights. 15 minutes at 215 degrees is hot enough to melt the seal to pull them apart but not hot enough to melt the plastic or wiring. When you are ready, if you need help, let me know. I will walk you through it.

hey bud, got your message about my headlights. Thanks for the compliment. Yes I painted them myself. After a lot of trial and error I found that to this what i did is very inexpensive. It just takes some time. Bake the headlights buy some primer and spray paint. Get some bondo (used on the clearance strip on the side to create a flat surface, get some sandpaper and led strips from ebay. Total cost was less than $50. Prep work took some time and shipping took forever. Also if you change you HIDs to something bluer than stock...dont go above 8000k or you cant see sh^t at night.