M56 can't do a burnout?
M56 can't do a burnout?
Hey guys I just bought a 2011 m56 and it doesn't do a burnout. RPMs wont go over 1500 when I hold the brake and hit the gas. Also its burning oil like crazy. What could cause that? I'm trying to avoid the dealership. Thanks.
That car doesn't have launch control, all you're doing is ****ing the car up holding the brakes and the gas like that. If you want quicker shifting turn that little dial in the middle to SPORT. Where is it burning oil from? Out the tailpipe? Coming from the engine bay? Magically disappearing or leaving drops on the ground?
That car doesn't have launch control, all you're doing is ****ing the car up holding the brakes and the gas like that. If you want quicker shifting turn that little dial in the middle to SPORT. Where is it burning oil from? Out the tailpipe? Coming from the engine bay? Magically disappearing or leaving drops on the ground?
Because the aggressive traction control doesn't allow for horseplay. It sounds like you need to do a compression test on the motor. 4 quarts low and you likely blew the piston rings and now need a new motor.
There's a safety feature that causes the engine to cut power when it sees you pressing both the brakes and the gas at the same time. Remember the whole Prius unintended acceleration issues a decade ago?
If you unplug the brake light switch on the pedal you'll be able to rip some skids. Some people wire in a toggle switch.
If you unplug the brake light switch on the pedal you'll be able to rip some skids. Some people wire in a toggle switch.
Joined: Mar 2009
Posts: 18,299
Likes: 1,488
From: By the sea, Tx
G35 sedan w/ too much money in mods

hahahahahahahahahahahahahahahahaha
You're doing it wrong and bought the wrong car for that! BTW are you 16?
Thread
Thread Starter
Forum
Replies
Last Post








