digitalwheelz monitor install
#2
Moderator
iTrader: (7)
Join Date: Jun 2003
Location: Long Island
Posts: 4,045
Likes: 0
Received 0 Likes
on
0 Posts
Re: digitalwheelz monitor install
You may wanna try contacting Speedoholic. He is from the area and may know someone that can install it. Only problem is that after u have it installed, you'll be required to come to the next meet we have so I can take a look at it! LOL
www.gsquad.org
www.gsquad.org
#3
Moderator
iTrader: (3)
Join Date: May 2004
Location: Washington, DC Area
Posts: 7,274
Likes: 0
Received 0 Likes
on
0 Posts
Re: digitalwheelz monitor install
I was there when Chuck (the owner of DigitalWheelz) did the install. It is a difficult install, however if you can do the double din, I think you can do this install. It does have a pretty good set of directions with it (which you can download from the site) - I'll be honest, I wouldnt have been able to do it without him by any means because I'm afraid to touch my dash but with the pictures and instructions, you never know.
I'd take a look at the thread that I posted last week with all the pictures. Will kinda give you an idea of what you're getting yourself into by doing it on your own.
Clears | Pedals | 35% TINT | Z-Tube | 4080 Stealthbox - JL 10w3 | Escort 8500 | PIAA's | Xenarc 7" Screen - DVD | Infinity Kappa's
I'd take a look at the thread that I posted last week with all the pictures. Will kinda give you an idea of what you're getting yourself into by doing it on your own.
Clears | Pedals | 35% TINT | Z-Tube | 4080 Stealthbox - JL 10w3 | Escort 8500 | PIAA's | Xenarc 7" Screen - DVD | Infinity Kappa's
#4
#6
Moderator
iTrader: (7)
Join Date: Jun 2003
Location: Long Island
Posts: 4,045
Likes: 0
Received 0 Likes
on
0 Posts
Re: digitalwheelz monitor install
I will take no responsibility in possibly messing up someone ride, I will just take orders and do as I will be told! LOL And of course be a set of 3rd n 4th hands which you can never have enough of!!! I hope the directions are detailed!!! Start reading them over n over again till you know it cold, it will make the install easier!
www.gsquad.org
www.gsquad.org
Thread
Thread Starter
Forum
Replies
Last Post