I have that kenstyle I got from buddah, plus my GReddy one... You pick

 

hmmm, the kenstyle for some reason i just don't like, never seen it on a cb but the greddy i would be interested in though, just wouldn't want to run it with stock sides though....thats why nismo would be good till i could get a set

 

What about a modified kenstyle? I was thinking of taking a day and modding it lol, you can come help.

But I have a full body kit, GReddy front bumper with INGS side skirts and Rear Valance. Side skirts still need fitted, cut and drilled.

 

modified how?? and i'm free pretty much anytime to help, getting my spring mounts cut on saturday but that shouldnt take too long but after that i'm free

any idea how much lower the greddy hangs vs stock?

 

I have the greddy on my right now and i am less than an inch off the ground with it, but im also on 18's with 225's in the front thats why its so low. But its no more than 1/2 inch lower than the stock bumper.

I was thinking cutting out the fog lights and smoothing it out so it is the same width as the middle vent but still peaks up into the point on the sides.... then maybe a lip from a sport bumper and modifying it to fit the kenstyle. Thats just my idea.

 

hmmm i can't picture how that'd look off the top of my head but seems like alotta work

definately want the greddy though, how much would you want for greddy plus sides painted and help me install

 

Its alot of sanding lol...

Hmmm, well paint would be the hardest, but I can do those in my garage so we dont have to worry about the weather.... Ummm provided you by the k2 primer/paint/clear coat and you sand it down... 100 for the paint and fitment(drilling/cutting) and for the sides and front 350 for both plus your stock bumper.

I recommned k2 primer because it spreads out and lays nice and flat so it give you an even painting surface.

Also, I have all the sanding supplies, you would just have to do the sanding work lol. I HATE PREPPING!

 

alright lemme think about it, would need to find where i could get the paint supplies and how much i'd even need for the whole job

 

Sherwin Williams Auto Paint store, I trust them. Take your paint code into them and tell them you need enough to do your G35 and they will give you enough. I know it was like 3/4 a gallon for my wifes integra plus hardener and thinner and it was only 250 for tuxedo black, which tuxedo black is like REALLY expensive paint.

 

Alright guys, for everyone that has a car and doesnt wax it. Please send me a PM and set up a time to come over and i will wax and wash your car for you for free one time lol. I hate seeing REALLY nice cars that are clean, but they dont wax them :/ Its upsetting lol. If you are driving a G, you should be looking clean!

 

i know someone that needs the full gambit clay/polish/wax..... actually a few people

i keep mine waxed and in my garage but i do need a polish starting to see swirls

 

I wont do clay for free. 1 its a PITA lol and 2 its expensive. but everything else. Send them my way for the first time. I'll do it for free so hopefully they will see what they are missing out on!

 

I keep mine outside and when its nice weather, my car is always pretty. Even with the body damage that was endured from when i bought it

 

yea clay is a PITA but takes just as long as wax to apply

my process is usually wash/clay/wash/wax let set overnight and add 2nd coat of wax
not including the breaks takes me 10 hours

 

I usually take about 6/7 hours if im in the zone and its not hot lol