central california section
^^^did anyone else read that article?
pierce is a joke
he must have been on crack after the finals or something
guys straight out trippin
that guy is not the best player in the world, let alone his team
guy effin sucks
kobe would score like a million if he had the people guarding him that the lakers put on pierce
i mean come on, radmonivic was guarding you!!!
what a joke..
pierce is a joke
he must have been on crack after the finals or something
guys straight out trippin
that guy is not the best player in the world, let alone his team
guy effin sucks
kobe would score like a million if he had the people guarding him that the lakers put on pierce
i mean come on, radmonivic was guarding you!!!
what a joke..
Registered User
Joined: Aug 2007
Posts: 1,561
Likes: 1
From: CenCal
Originally Posted by 559MostWanted
i saw some white coupe in a parking lot today it had the forum logo on it but didnt see driver around.
someone we know?
someone we know?
Originally Posted by blindS!de
That's vic's car! LOL OMG vic you've been spotted...
Registered User
Joined: Aug 2007
Posts: 1,561
Likes: 1
From: CenCal
Originally Posted by 559MostWanted
hmm not sure no driver was around it. i parked and did my errand and was out of there. I think white with tan interior?..not sure if it was vic i never seen photos of his ride or him before.
LOL j/p vic
we will ask him when he signs on then LOL
i been waiting forever for my overlays it seems LOL. he said he sent today...how long does it take from where hes at? Sat?
was the smaller section of our taillights a b1tch to do? The part thats part of the trunk
i been waiting forever for my overlays it seems LOL. he said he sent today...how long does it take from where hes at? Sat?
was the smaller section of our taillights a b1tch to do? The part thats part of the trunk
Registered User
Joined: Aug 2007
Posts: 1,561
Likes: 1
From: CenCal
Originally Posted by 559MostWanted
we will ask him when he signs on then LOL
i been waiting forever for my overlays it seems LOL. he said he sent today...how long does it take from where hes at? Sat?
was the smaller section of our taillights a b1tch to do? The part thats part of the trunk
i been waiting forever for my overlays it seems LOL. he said he sent today...how long does it take from where hes at? Sat?
was the smaller section of our taillights a b1tch to do? The part thats part of the trunk
I'm not sure where he's at, but i've seen him on some of the socal meets.. you'll prolly get it tomorrow or saturday...
The lights on the trunk was the easiest one because it's flat, the actual tailights was a PITA to do.. but you can do it.. you'll prolly do a better job than i did hehe
Registered User
Joined: Aug 2007
Posts: 1,561
Likes: 1
From: CenCal
Originally Posted by 559MostWanted
did u use the blow dryer thing or just credit card?
Can't wait for yours huh.... hehe
On the flipside 5K replacements are coming in tomorrow 
hows urs look at a closeup?
arnt those bulbs expensive....
i remember my civic i used to buy those stupid blue light bulbs that blow out all the time. I went thru like 10 sets(my friend had a shop so i didnt have to pay...warranty) before i said forget it, i put my stock bulbs on and till the day i told it...never had to replace any bulbs
arnt those bulbs expensive....
i remember my civic i used to buy those stupid blue light bulbs that blow out all the time. I went thru like 10 sets(my friend had a shop so i didnt have to pay...warranty) before i said forget it, i put my stock bulbs on and till the day i told it...never had to replace any bulbs
Last edited by NationsMostWanted; Aug 1, 2008 at 04:14 AM.
Did the white coupe have a pink Elmo doll in it? If it did, ya that was ViC LoL!!
Hey E and J are those overlays vinyl? If they are i might know a few tricks to make it easier to tget them on. If they arent ill just be talking out of my a$$ for a bit here. I watched an installer put on my clear bra(which i no longer have 
). Anyway if they are vinyl this might make it easier for you...
Get two spray bottles one with a 50/50 mix of water and rubbing alcohol and the other 50/50 with water and baby shampoo. Wash the tail lights 1st and then go over it with the alcohol mix to make sure you get all the oils off then wipe it dry. Spray the baby shampoo on the tail lights as a lubricant to move the overlays around until you have them how you want it. Once you get it where you want it use the alcohol mixture and tack on side down (the alcohol make the vinyl sticky) then wipe the excess water out. Keep repeating that until you are done. The alcohol makes the surface clean and makes the vinyl stick and the shampoo mixture allows you to move the overlay around. Hope that makes sense or maybe even helped a little haha
Hey E and J are those overlays vinyl? If they are i might know a few tricks to make it easier to tget them on. If they arent ill just be talking out of my a$$ for a bit here
. I watched an installer put on my clear bra(which i no longer have ). Anyway if they are vinyl this might make it easier for you...Get two spray bottles one with a 50/50 mix of water and rubbing alcohol and the other 50/50 with water and baby shampoo. Wash the tail lights 1st and then go over it with the alcohol mix to make sure you get all the oils off then wipe it dry. Spray the baby shampoo on the tail lights as a lubricant to move the overlays around until you have them how you want it. Once you get it where you want it use the alcohol mixture and tack on side down (the alcohol make the vinyl sticky) then wipe the excess water out. Keep repeating that until you are done. The alcohol makes the surface clean and makes the vinyl stick and the shampoo mixture allows you to move the overlay around. Hope that makes sense or maybe even helped a little haha
Registered User
Joined: Aug 2007
Posts: 1,561
Likes: 1
From: CenCal
Originally Posted by 559MostWanted
hows urs look at a closeup?
arnt those bulbs expensive....
i remember my civic i used to buy those stupid blue light bulbs that blow out all the time. I went thru like 10 sets(my friend had a shop so i didnt have to pay...warranty) before i said forget it, i put my stock bulbs on and till the day i told it...never had to replace any bulbs
arnt those bulbs expensive....
i remember my civic i used to buy those stupid blue light bulbs that blow out all the time. I went thru like 10 sets(my friend had a shop so i didnt have to pay...warranty) before i said forget it, i put my stock bulbs on and till the day i told it...never had to replace any bulbs
I contacted the company where i bought the bulbs from and he's just sending me a replacement and a return label for my crappy 6K's so no money out of my pocket.. great service. Bulbs are not that expensive, i didn't go with philips.. those things are at least 160 bucks a piece helll naaaaaaaa.... lol
Yeah i use to use those blue bulbs before as well, they're alright.. Im all about LED's now...hehe
Registered User
Joined: Aug 2007
Posts: 1,561
Likes: 1
From: CenCal
Originally Posted by InLU
Did the white coupe have a pink Elmo doll in it? If it did, ya that was ViC LoL!!
Hey E and J are those overlays vinyl? If they are i might know a few tricks to make it easier to tget them on. If they arent ill just be talking out of my a$$ for a bit here. I watched an installer put on my clear bra(which i no longer have ). Anyway if they are vinyl this might make it easier for you...
Get two spray bottles one with a 50/50 mix of water and rubbing alcohol and the other 50/50 with water and baby shampoo. Wash the tail lights 1st and then go over it with the alcohol mix to make sure you get all the oils off then wipe it dry. Spray the baby shampoo on the tail lights as a lubricant to move the overlays around until you have them how you want it. Once you get it where you want it use the alcohol mixture and tack on side down (the alcohol make the vinyl sticky) then wipe the excess water out. Keep repeating that until you are done. The alcohol makes the surface clean and makes the vinyl stick and the shampoo mixture allows you to move the overlay around. Hope that makes sense or maybe even helped a little haha
Hey E and J are those overlays vinyl? If they are i might know a few tricks to make it easier to tget them on. If they arent ill just be talking out of my a$$ for a bit here
. I watched an installer put on my clear bra(which i no longer have ). Anyway if they are vinyl this might make it easier for you...Get two spray bottles one with a 50/50 mix of water and rubbing alcohol and the other 50/50 with water and baby shampoo. Wash the tail lights 1st and then go over it with the alcohol mix to make sure you get all the oils off then wipe it dry. Spray the baby shampoo on the tail lights as a lubricant to move the overlays around until you have them how you want it. Once you get it where you want it use the alcohol mixture and tack on side down (the alcohol make the vinyl sticky) then wipe the excess water out. Keep repeating that until you are done. The alcohol makes the surface clean and makes the vinyl stick and the shampoo mixture allows you to move the overlay around. Hope that makes sense or maybe even helped a little haha
I did the 50/50 water and shampoo thing, without that i wont be able to lay down the overlays.. never tried the water and alcohol though....
I have a set for cherry's 4runner too but the overlays were cut too short.. next time im buying a whole vinyl sheet and cutting it myself.. if i had the guts LOL