FS: Endless 14" 6 pot BBK Front Kit
#1
04-06-2006, 06:13 PM
FS: Endless 14" 6 pot BBK Front Kit
I'm looking into a new car so...
*This is only the front brakes* Brakes are in great condition. About <1mm wear on the rotors and 1-2mm of wear on the pads. I put a straight edge across the entire rotor (including the part that isn't touched by the pads and there is no ridge or gap.) I've had these for a little over a year now and my driving is almost exclusively highway. (My stock rear brembo pads are down only 2mm total for over 31K miles on the odometer.) That kinda tells you how hard I am on the car. I've had the Endless kit for about 17K miles now.
The rotors are slotted and the calipers are forged for strength and have 6 staggered pistons.
The calipers are custom gold which is a little lighter than the brembo golds. The rotor hat is fairly close to the color of the stock brembos.
The kit comes with stainless lines and an extra set of Endless CC-R racing pads. I got this kit for HPDE's but I never tracked it. The CC-R pads are brand new in the box. I've never tracked the car with these brakes.
I paid $4100 from adam@z1auto with the extra set of pads. There was also an extra charge for Gold calipers back then. I'm looking for $2800 + actual shipping costs (have a UPS account.) Insurance is optional but highly recommended. All of the components will be shipped in their original packaging. Postal Money order or Cashier's check from a well-known bank preferred. Paypal is fine if you want to pay the 3%.
Here's a link to the imagestation album:
http://www.imagestation.com/album/pi...?id=2134520251
Here's a link to the endless site with the exact kit:
http://www.endlessusa.com/products/p...044&cid=4&pg=6
I bedded them in properly and I've never heard 1 squeek from them. No shimmy while braking either. They are absolutely solid.
If you're local (Portland Oregon), which I prefer so you can inspect them before purchase, I will even help you install them for a reasonable labor charge.
The new owner will get a lot of
*This is only the front brakes* Brakes are in great condition. About <1mm wear on the rotors and 1-2mm of wear on the pads. I put a straight edge across the entire rotor (including the part that isn't touched by the pads and there is no ridge or gap.) I've had these for a little over a year now and my driving is almost exclusively highway. (My stock rear brembo pads are down only 2mm total for over 31K miles on the odometer.) That kinda tells you how hard I am on the car. I've had the Endless kit for about 17K miles now.
The rotors are slotted and the calipers are forged for strength and have 6 staggered pistons.
The calipers are custom gold which is a little lighter than the brembo golds. The rotor hat is fairly close to the color of the stock brembos.
The kit comes with stainless lines and an extra set of Endless CC-R racing pads. I got this kit for HPDE's but I never tracked it. The CC-R pads are brand new in the box. I've never tracked the car with these brakes.
I paid $4100 from adam@z1auto with the extra set of pads. There was also an extra charge for Gold calipers back then. I'm looking for $2800 + actual shipping costs (have a UPS account.) Insurance is optional but highly recommended. All of the components will be shipped in their original packaging. Postal Money order or Cashier's check from a well-known bank preferred. Paypal is fine if you want to pay the 3%.
Here's a link to the imagestation album:
http://www.imagestation.com/album/pi...?id=2134520251
Here's a link to the endless site with the exact kit:
http://www.endlessusa.com/products/p...044&cid=4&pg=6
I bedded them in properly and I've never heard 1 squeek from them. No shimmy while braking either. They are absolutely solid.
If you're local (Portland Oregon), which I prefer so you can inspect them before purchase, I will even help you install them for a reasonable labor charge.
The new owner will get a lot of
Last edited by al503; 04-06-2006 at 07:15 PM.
Thread
Thread Starter
Forum
Replies
Last Post
911Turbo
19 Inch
10
08-24-2016 08:31 AM
netcbc
Steering & Suspension CDN
0
07-24-2015 11:25 AM