For the Autos only
 

MREV2's are made from non-revup core exchanges. So I was talking to Tony Colette from motordyneengineering and he told me that they will buy your non-revup lower plenum for $100. :biggthumpup: Just thought I'd let all the 5AT G's know just in case any of ya'll were going to get the MREV2 and didn't want to keep your lower plenum.

Good Info! I didnt know that!

i always like makin a lil extra cash with my oem stuff lol

so does this add hp and how much does it cost to replace it?

MREV 2 Manifold TM - The most powerful naturally aspirated bolt on you can put on your revup engine.

When used with or without a spacer or aftermarket upper plenum, this lower plenum will make substantial power gains. Multiple independent test show when used with a 5/16" spacer on the revup engine, the combination will add a "minimum" of 15+ HP and 18+ TQ in the upper midrange. Many independent MREV 2 Manifold REVUP tests have dynod in excess of 20HP and 30 TQ in the upper midrange and with high RPM peak power increased by 3-5 HP.

The MREV2 is a prerequisite to the plenum spacer when used on a revup engine. No other normally aspirated VQ modification provides as much gain as the MREV 2 Manifold!

Independent dyno test on the Revup engine.

Independent dyno test on the Non-Revup engine.

Note: MREV2's are made from non-revup core exchanges. Motordyne will buy your non-revup lower plenum. Contact us for more information

^^^ all that was from the motordyne website, but from what I've been reading, the mrev2 doesn't add that much gains for our Autos... Also from what I read was that if you install the mrev2 and spacer, you'll be running lean so it's a good idea to get a tune.

Motordyne sells the MREV2 for $485 plus shipping. Ebay sells it for $453 with free shipping. Installing this shouldnt be too hard... I installed my spacer this weekend and I took out the lower plenum to check it out

it is really easy to install. Just be very careful not to strip the threads as they are aluminum.

Again, just be careful not to cross thread or over torque.

^^^ or you can have this guy install it for ya adam

[IMG]http://i18.photobucket.com/albums/b1...ude1587/tn.jpg[/IMG]