20mm spacers front/rear on OEM 17" Coupe rims
Thread Starter
|
Registered User
Joined: Mar 2006
Posts: 226
Likes: 1
From: Sioux Falls, SD U.S.A
Originally Posted by SIN3
what are we looking at here? closer pics maybe? looks the same from that far away. nice snow.
another one (not mine)
Last edited by Loe G35; Mar 6, 2008 at 03:04 PM.
Originally Posted by Loe G35
The front 19X8's basically flushed with the 20mm spacers. If I remove the spacers, it'll be too tucked compared to the rears. Since the rears at a half inch wider (but with a 33et offset), but should push the wheel out farther up front running 19x8.5" 33et w/o spacers vs. 19x8" 30et w/o spacers without making it look completely flushed.
I understand there will be less contact patch even though I'm running 245's all around since there is a .5" difference in wheel width.
It's hard for me to explain the look I'm going for so I'm just going to try it.
I understand there will be less contact patch even though I'm running 245's all around since there is a .5" difference in wheel width.
It's hard for me to explain the look I'm going for so I'm just going to try it.
Thread Starter
|
Registered User
Joined: Mar 2006
Posts: 226
Likes: 1
From: Sioux Falls, SD U.S.A
Originally Posted by redlude97
The difference is only +3mm, and combined with a more stretched tire on your 8.5" rim is going to net you a wheel that appears as tucked as stock. You will need at least a 10mm spacer to notice any difference at all
Thread
Thread Starter
Forum
Replies
Last Post
FS[Canada]: 16" Ronal Rims with 205 65R16 Michelin X-Ice
multimut
Wheels & Tires CDN
4
Apr 8, 2018 06:07 PM
BlackGee35
G35 Coupe V35 2003 - 07
1
Jul 23, 2015 01:36 PM
