Aggressive Wheels & Stretched Tires: Post 'Em Up! [[Some NSFW]]
My car DOES see the road, it doesn't hide in the garage....haha.
I drive it to work 2 or 3 times a week. I actually drove it to the grocery store this evening
And the only pics of it ever post are like within a day of me washing it so you guys only see it when its clean.
I drive it to work 2 or 3 times a week. I actually drove it to the grocery store this evening
And the only pics of it ever post are like within a day of me washing it so you guys only see it when its clean.
on the hunt for new camber arms....
what would you guys recommend, ideally SPL is numero uno but what's the second best option right after SPL ??
what are you guys using mostly ??
what would you guys recommend, ideally SPL is numero uno but what's the second best option right after SPL ??
what are you guys using mostly ??
Registered User
Joined: Aug 2011
Posts: 43
Likes: 4
From: Houma, LA
I had 19x10 -10 up front with 225/35 and was fine . 6mm more was doable . Just pinch your front fenders flat Vic.
For the rears, your gonna need a pull. I'm at 11.5 -14, and had to get them pulled and already runnin -4.8 camber .
The 245 /35 on the 11.5 will be fine depending if it runs large or not
For the rears, your gonna need a pull. I'm at 11.5 -14, and had to get them pulled and already runnin -4.8 camber .
The 245 /35 on the 11.5 will be fine depending if it runs large or not
Last edited by NOLAG35; Dec 25, 2011 at 10:14 AM. Reason: Year and make of vehicle
Registered User
Joined: Jan 2011
Posts: 332
Likes: 24
Wrong topic to post this in, but you will need to roll fenders @ that low offset and that wide of a wheel.
Joined: Feb 2010
Posts: 5,249
Likes: 430
From: Houston
Itasha Coupe
I'm new to the aggressive set ups, but going to buy a set of 20x10.5 Vossen CV3's next week for front and rear set ups. Will I have trouble fitting those 20x10.5's up front with 235/35/20? The offset is +15 if I recall correctly. I have a 2004 G35 Coupe. Tires on the rear will be 245/35/20
Low offset not found.
I'm new to the aggressive set ups, but going to buy a set of 20x10.5 Vossen CV3's next week for front and rear set ups. Will I have trouble fitting those 20x10.5's up front with 235/35/20? The offset is +15 if I recall correctly. I have a 2004 G35 Coupe. Tires on the rear will be 245/35/20
Registered User
Joined: Aug 2011
Posts: 43
Likes: 4
From: Houma, LA
I'm going with the 10.5's all the way around to have the deep concave look on all 4 wheels. I've been told that the 10.5's up front will be hard to fit and will need stretched tires. I've never messed with aggressive stance, negative camber, etc. I'm more of a flush person myself, but if I have to go hellaflush and be aggressive to fit those wheels then fine. As for the +15 offset that's what they come in. I'll be running spacers to make them as flush as possible if needed. Have the a arms and BC coils to adjust stance as needed to complete the look. I was told to check with the forums in aggressive threads to get ideas on best tire sizes to fit those wheels
![Aggressive Wheels & Stretched Tires: Post 'Em Up! [[Some NSFW]]-6eej2.gif](https://g35driver.com/forums/attachments/picture-share/269091d1683124871-aggressive-wheels-stretched-tires-post-em-up-some-nsfw-6eej2.gif)
Registered User
Joined: Aug 2011
Posts: 43
Likes: 4
From: Houma, LA
I had 19x10 -10 up front with 225/35 and was fine . 6mm more was doable . Just pinch your front fenders flat Vic.
For the rears, your gonna need a pull. I'm at 11.5 -14, and had to get them pulled and already runnin -4.8 camber .
The 245 /35 on the 11.5 will be fine depending if it runs large or not
For the rears, your gonna need a pull. I'm at 11.5 -14, and had to get them pulled and already runnin -4.8 camber .
The 245 /35 on the 11.5 will be fine depending if it runs large or not
So Dre... Are you implying that people shouldn't use the forums to get info and learn when they're new to a specific area in mods? People like you I wish lived close enough to meet up with in person because you're some internet *****! You don't have anything helpful to say in response then how about you shut the f@#k up!
NOLA, people in here just dont like too much conversation going back and forth that's why it's discouraged, everyone just wants to see pictures mostly and little talk except mostly the talk in regards to the pics posted...
also doesn't help you that Shane's actually has a wheel thread for exactly your types of questions, best you can get away with in here is ask a quick question and bounce.... tryin to get into a convo about it will result in GIF's and JPG's up the a$$..... especially when you bring up Vossen wheels
also doesn't help you that Shane's actually has a wheel thread for exactly your types of questions, best you can get away with in here is ask a quick question and bounce.... tryin to get into a convo about it will result in GIF's and JPG's up the a$$..... especially when you bring up Vossen wheels
NOLAG35, don't mind Dre he's a ***** to everyone, even his friends.
For the specs you are trying to run you don't even need stretched tires to clear on Coupe. Now if you want to add spacers because you are going for a flush/poke look then that's different.
For the specs you are trying to run you don't even need stretched tires to clear on Coupe. Now if you want to add spacers because you are going for a flush/poke look then that's different.
